lkml.org 
[lkml]   [2022]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 14/16] firmware: arm_scmi: Add testing Voltage protocol support
On Mon, Aug 01, 2022 at 10:17:00AM +0530, Arun KS wrote:
> Hi Cristian,
>

Hi Arun,

first of all thanks for the feedback !

> On Mon, Feb 28, 2022 at 4:23 AM Cristian Marussi
> <cristian.marussi@arm.com> wrote:
> >
> > firmware: arm_scmi: Add testing Voltage protocol support
> >
> > Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> > ---
> > .../arm_scmi/scmi_test_driver/Makefile | 2 +-
> > .../arm_scmi/scmi_test_driver/scmi_test.c | 2 +
> > .../arm_scmi/scmi_test_driver/test_common.h | 1 +
> > .../arm_scmi/scmi_test_driver/test_voltages.c | 51 +++++++++++++++++++
> > 4 files changed, 55 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/firmware/arm_scmi/scmi_test_driver/test_voltages.c
> >
> > diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/Makefile b/drivers/firmware/arm_scmi/scmi_test_driver/Makefile
> > index 68a3d94a6a88..3b7df18de250 100644
> > --- a/drivers/firmware/arm_scmi/scmi_test_driver/Makefile
> > +++ b/drivers/firmware/arm_scmi/scmi_test_driver/Makefile
> > @@ -1,5 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > scmi_test_driver-objs := scmi_test.o test_common.o test_clocks.o test_sensors.o \
> > - test_powers.o
> > + test_powers.o test_voltages.o
> > obj-$(CONFIG_ARM_SCMI_TEST_DRIVER) += scmi_test_driver.o
> >
> > diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/scmi_test.c b/drivers/firmware/arm_scmi/scmi_test_driver/scmi_test.c
> > index df0d3e572010..2ca9f82c5bf3 100644
> > --- a/drivers/firmware/arm_scmi/scmi_test_driver/scmi_test.c
> > +++ b/drivers/firmware/arm_scmi/scmi_test_driver/scmi_test.c
> > @@ -26,6 +26,7 @@ int (*scmi_test_init[SCMI_MAX_PROTOCOLS])(struct scmi_test_setup *) = {
> > [SCMI_PROTOCOL_POWER] = scmi_test_power_init,
> > [SCMI_PROTOCOL_CLOCK] = scmi_test_clock_init,
> > [SCMI_PROTOCOL_SENSOR] = scmi_test_sensor_init,
> > + [SCMI_PROTOCOL_VOLTAGE] = scmi_test_voltage_init,
> > };
> >
> > static void
> > @@ -125,6 +126,7 @@ static int scmi_testing_probe(struct scmi_device *sdev)
> > }
> >
> > static const struct scmi_device_id scmi_id_table[] = {
> > + { SCMI_PROTOCOL_VOLTAGE, "__scmi_test-voltage" },
> > { SCMI_PROTOCOL_CLOCK, "__scmi_test-clock" },
> > { SCMI_PROTOCOL_SENSOR, "__scmi_test-sensor" },
> > { SCMI_PROTOCOL_POWER, "__scmi_test-power" },
> > diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h b/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
> > index 9f3d35ba4477..338b65da593f 100644
> > --- a/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
> > +++ b/drivers/firmware/arm_scmi/scmi_test_driver/test_common.h
> > @@ -102,6 +102,7 @@ int scmi_test_release(struct inode *ino, struct file *filp);
> >
> > int scmi_test_clock_init(struct scmi_test_setup *tsp);
> > int scmi_test_sensor_init(struct scmi_test_setup *tsp);
> > +int scmi_test_voltage_init(struct scmi_test_setup *tsp);
> > int scmi_test_power_init(struct scmi_test_setup *tsp);
> >
> > #endif /* __SCMI_TEST_COMMON_H */
> > diff --git a/drivers/firmware/arm_scmi/scmi_test_driver/test_voltages.c b/drivers/firmware/arm_scmi/scmi_test_driver/test_voltages.c
> > new file mode 100644
> > index 000000000000..ab91080e3a0f
> > --- /dev/null
> > +++ b/drivers/firmware/arm_scmi/scmi_test_driver/test_voltages.c
> > @@ -0,0 +1,51 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * SCMI Testing Driver - Voltage Protocol
> > + *
> > + * Copyright (C) 2022 ARM Ltd.
> > + */
> > +
> > +#include <linux/dcache.h>
> > +#include <linux/debugfs.h>
> > +#include <linux/err.h>
> > +#include <linux/fs.h>
> > +#include <linux/io.h>
> > +#include <linux/kstrtox.h>
> > +#include <linux/module.h>
> > +#include <linux/scmi_protocol.h>
> > +#include <linux/slab.h>
> > +
> > +#include "test_common.h"
> > +
> > +struct scmi_voltage_data {
> > + unsigned int version;
> > + int count;
> > +};
> > +
> > +int scmi_test_voltage_init(struct scmi_test_setup *tsp)
> > +{
> > + struct scmi_voltage_data *vdata;
> > + struct device *dev = &tsp->sdev->dev;
> > + const struct scmi_voltage_proto_ops *voltage_ops;
> > +
> > + vdata = devm_kzalloc(dev, sizeof(*vdata), GFP_KERNEL);
> > + if (!vdata)
> > + return -ENOMEM;
> > +
> > + voltage_ops = tsp->ops;
> > + vdata->version = voltage_ops->version_get(tsp->ph);
> > + vdata->count = voltage_ops->num_domains_get(tsp->ph);
> > +
> > + if (vdata->count <= 0) {
> > + dev_err(dev, "number of voltage doms invalid: %d\n",
> > + vdata->count);
> > + return vdata->count ?: -EINVAL;
> > + }
> > +
> > + dev_info(dev, "Found %d voltage resources.\n", vdata->count);
> > +
> > + tsp->priv = vdata;
> > + debugfs_create_x32("version", 0400, tsp->parent, &vdata->version);
> Any particular reason, why we are not creating debugfs entires for
> regulator level_get/level_set like it was done for
> clocks(rate_get_set)?

No, it is just that this RFC initial series was meant to gather feedback
on this approach at testing and to experiment with this solution itself
a bit, before committing more work to more extensive cover all SCMI protocols
and ops... so the series is 'incomplete' by design :P

... having said that, despite the series had not received so much
feedback at the end, I have worked in the background on extending its
SCMI coverage, so that now I can support all SCMI protocols (exposing all
ops on debugfs) ... I'll plan to post a new more extensive series in the
near(-ish) future once I'll have the time to clean it up and add more
example KSFT testcases (and fix the dummy ones ...)

Thanks,
Cristian

\
 
 \ /
  Last update: 2022-08-01 08:51    [W:0.148 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site