lkml.org 
[lkml]   [2022]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 15/16] selftests: arm64: Add initial SCMI testcases
Hi Cristian,

On Mon, Feb 28, 2022 at 12:16 PM Cristian Marussi
<cristian.marussi@arm.com> wrote:
>
> A few initial testcases for Clock and Sensot protocol plus all the test
> infrastructure, including the test runeer.
>
> All of this just an experimental demonstrator.
>
> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
> ---
> tools/testing/selftests/arm64/Makefile | 2 +-
> tools/testing/selftests/arm64/scmi/Makefile | 6 +
> tools/testing/selftests/arm64/scmi/config | 1 +
> .../arm64/scmi/kselftest_scmi_lib.sh | 118 ++++++++++++++++++
> .../selftests/arm64/scmi/run_scmi_tests.sh | 69 ++++++++++
> .../testcases/protocol_0x14/clock_enable.sh | 33 +++++
> .../protocol_0x14/clock_rate_read.sh | 18 +++
> .../protocol_0x14/clock_rate_write.sh | 29 +++++
> .../testcases/protocol_0x15/sensor_reading.sh | 17 +++
> 9 files changed, 292 insertions(+), 1 deletion(-)
> create mode 100644 tools/testing/selftests/arm64/scmi/Makefile
> create mode 100644 tools/testing/selftests/arm64/scmi/config
> create mode 100644 tools/testing/selftests/arm64/scmi/kselftest_scmi_lib.sh
> create mode 100755 tools/testing/selftests/arm64/scmi/run_scmi_tests.sh
> create mode 100755 tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_enable.sh
> create mode 100755 tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_read.sh
> create mode 100755 tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_write.sh
> create mode 100755 tools/testing/selftests/arm64/scmi/testcases/protocol_0x15/sensor_reading.sh
>
> diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile
> index 1e8d9a8f59df..6648dd8e2173 100644
> --- a/tools/testing/selftests/arm64/Makefile
> +++ b/tools/testing/selftests/arm64/Makefile
> @@ -4,7 +4,7 @@
> ARCH ?= $(shell uname -m 2>/dev/null || echo not)
>
> ifneq (,$(filter $(ARCH),aarch64 arm64))
> -ARM64_SUBTARGETS ?= tags signal pauth fp mte bti abi
> +ARM64_SUBTARGETS ?= tags signal pauth fp mte bti abi scmi
> else
> ARM64_SUBTARGETS :=
> endif
> diff --git a/tools/testing/selftests/arm64/scmi/Makefile b/tools/testing/selftests/arm64/scmi/Makefile
> new file mode 100644
> index 000000000000..8786d8d4c332
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/scmi/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +TEST_PROGS := run_scmi_tests.sh
> +TEST_FILES := kselftest_scmi_lib.sh testcases/*
> +
> +include ../../lib.mk
> diff --git a/tools/testing/selftests/arm64/scmi/config b/tools/testing/selftests/arm64/scmi/config
> new file mode 100644
> index 000000000000..161387084a3f
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/scmi/config
> @@ -0,0 +1 @@
> +CONFIG_ARM_SCMI_TEST_DRIVER=y
> diff --git a/tools/testing/selftests/arm64/scmi/kselftest_scmi_lib.sh b/tools/testing/selftests/arm64/scmi/kselftest_scmi_lib.sh
> new file mode 100644
> index 000000000000..54d27b5f3e1a
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/scmi/kselftest_scmi_lib.sh
> @@ -0,0 +1,118 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +SCMI_TEST_DRV="scmi_test_driver"
> +TRES=(0 0 0)
> +
> +ksft_log()
> +{
> + echo -e "[SCMI]: $1"
> +}
> +
> +ksft_skip()
> +{
> + echo -e "[SKIP]: $1"
> + exit 4
> +}
> +
> +ksft_pass()
> +{
> + echo -e "[PASS]: $1"
> +}
> +
> +ksft_fail()
> +{
> + echo -e "[FAIL]: $1"
> + exit 1
> +}
> +
> +ksft_results()
> +{
> + if [ $# -gt 0 ]; then
> + local val
> + local idx
> + local ret=$1
> +
> + case "$ret" in
> + 0)
> + idx=0
> + ;;
> + 4)
> + idx=1
> + ;;
> + *)
> + idx=2
> + ;;
> + esac
> + val=${TRES[${idx}]}
> + TRES[$idx]=$((val + 1))
> + else
> + ksft_log "Summary - PASS[${TRES[0]}] SKIP[${TRES[1]}] FAIL[${TRES[2]}]"
> + [ "x${TRES[2]}" != "x0" ] && exit 1
> + [ "x${TRES[1]}" != "x0" -a "x${TRES[0]}" == "x0" ] && exit 4
> + exit 0
> + fi
> +}
> +
> +ksft_scmi_run_one()
> +{
> + tcase=$1
> +
> + echo "-> Running testcase: $tcase"
> +
> + ./$tcase
> + ret=$?
> +
> + ksft_results $ret
> +}
> +
> +ksft_scmi_check_fw_version()
> +{
> + local supported=$1
> + local current="${SCMI_VENDOR}:${SCMI_SUB_VENDOR}"
> +
> + if [ "x${current}" != "x${supported}" ]; then
> + ksft_skip "Current FW('$current') is UNSUPPORTED. Should be '$supported'"
> + fi
> +}
> +
> +ksft_scmi_transport_is_atomic ()
> +{
> + [ "x$SCMI_TRANSPORT_IS_ATOMIC" == "xY" ] && return 0 || return 1
> +}
> +
> +ksft_scmi_protocol_resources_get()
> +{
> + local proto_dir=$1
> + local resources=""
> +
> + for d in ${proto_dir}/*; do
> + rd="$(basename $d)"
> + [[ $rd =~ [0-9] ]] && resources="$resources $rd"
> + done
> +
> + echo "$resources"
> +}
> +
> +ksft_scmi_value_get()
> +{
> + local syspath=$1
> + local __retval=$2
> + local value
> +
> + value=$(cat $syspath)
> + [ "x$?" != "x0" ] && ksft_fail "Fail to read $syspath"
> +
> + eval $__retval="'$value'"
> +}
> +
> +ksft_scmi_value_set()
> +{
> + local syspath=$1
> + local value=$2
> +
> + echo $value > $syspath
> + [ "x$?" != "x0" ] && ksft_fail "Fail to write $syspath - err:$?"
> +}
> +
> +
> diff --git a/tools/testing/selftests/arm64/scmi/run_scmi_tests.sh b/tools/testing/selftests/arm64/scmi/run_scmi_tests.sh
> new file mode 100755
> index 000000000000..f372744a4579
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/scmi/run_scmi_tests.sh
> @@ -0,0 +1,69 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +. ./kselftest_scmi_lib.sh
> +
> +check_root_privs()
> +{
> + [ x"$(id -u)" != "x0" ] && ksft_skip "You need to be root"
> +}
> +
> +check_scmi_testing_stack()
> +{
> + local debugfs_root=$(findmnt -o TARGET -t debugfs | grep -v TARGET)
> + export SCMI_DEBUGFS_TOPDIR="$debugfs_root/scmi"
> +
> + # Try to load module if not builtin
> + if [ ! -d $SCMI_DEBUGFS_TOPDIR ]; then
> + modprobe $SCMI_TEST_DRV || ksft_skip "Failed to load $SCMI_TEST_DRV"
> + [ ! -d $SCMI_DEBUGFS_TOPDIR ] && ksft_skip "SCMI Test stack not found; is CONFIG_ARM_SCMI_TEST_DRIVER enabled ?"
> + fi
> +}
> +
> +setup_scmi_test_env()
> +{
> + local scmi_info_dir="${SCMI_DEBUGFS_TOPDIR}/info/"
> +
> + export SCMI_VENDOR="$(cat ${scmi_info_dir}/vendor_id)"
> + export SCMI_SUB_VENDOR="$(cat ${scmi_info_dir}/sub_vendor_id)"
> + export SCMI_VERS_MAJ="$(cat ${scmi_info_dir}/major_ver)"
> + export SCMI_VERS_MIN="$(cat ${scmi_info_dir}/minor_ver)"
> + export SCMI_VERS_IMPL="$(cat ${scmi_info_dir}/impl_ver)"
> +
> + ksft_log "Found stack: $SCMI_VENDOR/$SCMI_SUB_VENDOR ${SCMI_VERS_MAJ}.${SCMI_VERS_MAJ} - $SCMI_VERS_IMPL"
> +
> + SCMI_TEST_PROTOS=""
> + for p in ${SCMI_DEBUGFS_TOPDIR}/protocol_*; do
> + SCMI_TEST_PROTOS="${SCMI_TEST_PROTOS} $(basename $p)"
> + done
> +
> + ksft_log "Found testing protocols: $SCMI_TEST_PROTOS"
> +
> + export SCMI_TEST_PROTOS
> + SCMI_TRANSPORT_IS_ATOMIC="N"
> + [ -d "${SCMI_DEBUGFS_TOPDIR}/transport" ] &&
> + SCMI_TRANSPORT_IS_ATOMIC=$(cat "${SCMI_DEBUGFS_TOPDIR}/transport/is_atomic")
> + export SCMI_TRANSPORT_IS_ATOMIC
> +}
> +
> +# Setup
> +check_root_privs
> +
> +check_scmi_testing_stack
> +
> +setup_scmi_test_env
> +
> +# Main
> +# Run all available tests for the found protocols
> +#
> +for proto_dir in $SCMI_TEST_PROTOS; do
> + [ ! -d $proto_dir ] && ksft_log "$proto_dir tests NOT supported." && continue
> + export TST_PROTO_DIR="${SCMI_DEBUGFS_TOPDIR}/${proto_dir}"
> + TST_PROTO_VERSION=$(cat ${TST_PROTO_DIR}/version)
> + ksft_log "Running tests for SCMI $proto_dir ver:$TST_PROTO_VERSION"
> + for tst in $proto_dir/*; do
> + ksft_scmi_run_one $tst
> + done
> +done
> +
> +ksft_results
> diff --git a/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_enable.sh b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_enable.sh
> new file mode 100755
> index 000000000000..4cdf3a097ba7
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_enable.sh
> @@ -0,0 +1,33 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +. ./kselftest_scmi_lib.sh
> +
> +supported_fw="EMU-SCMI-VM:userland"
> +ksft_scmi_check_fw_version $supported_fw

what is the necessity of this check? Won't it limits the use of this
common test script across multiple platforms?

> +
> +clock_enable_disable() {
> + rname=$1
> + rdir=$2
> + clk_op=$3
> +
> + ksft_scmi_value_set $rdir/$clk_op Y
> + ksft_scmi_value_set $rdir/$clk_op N
> + ksft_log "Clock $rname: $clk_op - ON/OFF ... OK"
> +}
> +
> +resources=$(ksft_scmi_protocol_resources_get $TST_PROTO_DIR)
> +ksft_log "Found Clock resources: $resources"
> +
> +for res in $resources;do
> + resd="$TST_PROTO_DIR/$res"
> + name="$(cat $resd/info/name)"
> +
> + clock_enable_disable $name $resd "enable"
> + if [ ksft_transport_is_atomic ]; then
> + clock_enable_disable $name $resd "enable_atomic_irqs_off"
> + clock_enable_disable $name $resd "enable_atomic_irqs_on"
> + fi
> +done
> +
> +ksft_pass "$0"
> diff --git a/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_read.sh b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_read.sh
> new file mode 100755
> index 000000000000..88c444fd317d
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_read.sh
> @@ -0,0 +1,18 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +. ./kselftest_scmi_lib.sh
> +
> +resources=$(ksft_scmi_protocol_resources_get $TST_PROTO_DIR)
> +ksft_log "Found Clock resources: $resources"
> +
> +for res in $resources;do
> + resd="$TST_PROTO_DIR/$res"
> + name="$(cat $resd/info/name)"
> + val=0
> +
> + ksft_scmi_value_get $resd/rate_get_set val
> + ksft_log "$name READ => $val"
> +done
> +
> +ksft_pass "$0"
> diff --git a/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_write.sh b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_write.sh
> new file mode 100755
> index 000000000000..346084ec3812
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x14/clock_rate_write.sh
> @@ -0,0 +1,29 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +. ./kselftest_scmi_lib.sh
> +
> +supported_fw="EMU-SCMI-VM:userland"
> +ksft_scmi_check_fw_version $supported_fw
> +
> +resources=$(ksft_scmi_protocol_resources_get $TST_PROTO_DIR)
> +ksft_log "Found Clock resources: $resources"
> +
> +for res in $resources;do
> + resd="$TST_PROTO_DIR/$res"
> + name="$(cat $resd/info/name)"
> + val=0
> + oldval=0
> + setval=0
> +
> + ksft_scmi_value_get $resd/rate_get_set oldval
> + setval=$((oldval + 666))
> +
> + ksft_scmi_value_set $resd/rate_get_set $setval
> +
> + ksft_scmi_value_get $resd/rate_get_set val
> + [ "x$val" != "x$setval" ] && ksft_fail "Set:$setval readback:$val"
> + ksft_log "$name OK -> read:$oldval set:$setval readback:$val"
> +done
> +
> +ksft_pass "$0"
> diff --git a/tools/testing/selftests/arm64/scmi/testcases/protocol_0x15/sensor_reading.sh b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x15/sensor_reading.sh
> new file mode 100755
> index 000000000000..b0f5f6361379
> --- /dev/null
> +++ b/tools/testing/selftests/arm64/scmi/testcases/protocol_0x15/sensor_reading.sh
> @@ -0,0 +1,17 @@
> +#!/bin/bash
> +
> +. ./kselftest_scmi_lib.sh
> +
> +resources=$(ksft_scmi_protocol_resources_get $TST_PROTO_DIR)
> +ksft_log "Found Sensor resources: $resources"
> +
> +for res in $resources;do
> + resd="$TST_PROTO_DIR/$res"
> + name="$(cat $resd/info/name)"
> + val=0
> +
> + ksft_scmi_value_get $resd/reading_get val
> + ksft_log "$name READ => $val"
> +done
> +
> +ksft_pass $0
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2022-08-01 06:53    [W:0.233 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site