lkml.org 
[lkml]   [2022]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] riscv: dts: microchip: hook up the mpfs' l2cache
From
On Wed, 29 Jun 2022 13:07:33 PDT (-0700), conor@kernel.org wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
>
> The initial PolarFire SoC devicetree must have been forked off from
> the fu540 one prior to the addition of l2cache controller support being
> added there. When the controller node was added to mpfs.dtsi, it was
> not hooked up to the CPUs & thus sysfs reports an incorrect cache
> configuration. Hook it up.
>
> Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")

I just noticed this as I was looking over the PR I just sent, but since
you're sending PRs I'm no longer re-writing your commits and thus I
won't be adding stable CCs. If you want stuff CC'd to stable you'll
have to either add it to the tags in the commit, or do so after the
fact.

> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> arch/riscv/boot/dts/microchip/mpfs.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
> index 3095d08453a1..496d3b7642bd 100644
> --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
> +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
> @@ -50,6 +50,7 @@ cpu1: cpu@1 {
> riscv,isa = "rv64imafdc";
> clocks = <&clkcfg CLK_CPU>;
> tlb-split;
> + next-level-cache = <&cctrllr>;
> status = "okay";
>
> cpu1_intc: interrupt-controller {
> @@ -77,6 +78,7 @@ cpu2: cpu@2 {
> riscv,isa = "rv64imafdc";
> clocks = <&clkcfg CLK_CPU>;
> tlb-split;
> + next-level-cache = <&cctrllr>;
> status = "okay";
>
> cpu2_intc: interrupt-controller {
> @@ -104,6 +106,7 @@ cpu3: cpu@3 {
> riscv,isa = "rv64imafdc";
> clocks = <&clkcfg CLK_CPU>;
> tlb-split;
> + next-level-cache = <&cctrllr>;
> status = "okay";
>
> cpu3_intc: interrupt-controller {
> @@ -131,6 +134,7 @@ cpu4: cpu@4 {
> riscv,isa = "rv64imafdc";
> clocks = <&clkcfg CLK_CPU>;
> tlb-split;
> + next-level-cache = <&cctrllr>;
> status = "okay";
> cpu4_intc: interrupt-controller {
> #interrupt-cells = <1>;

\
 
 \ /
  Last update: 2022-07-15 19:34    [W:0.098 / U:18.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site