lkml.org 
[lkml]   [2022]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 13/15] riscv: dts: canaan: fix bus {ranges,reg} warnings
Date


On 30/06/2022 17:49, Niklas Cassel wrote:
> On Wed, Jun 29, 2022 at 07:43:42PM +0100, Conor Dooley wrote:
>> From: Conor Dooley <conor.dooley@microchip.com>
>>
>> The k210 devicetrees warn about missing/empty reg and/or ranges
>> properties:
>> arch/riscv/boot/dts/canaan/k210.dtsi:408.22-460.5: Warning (unit_address_vs_reg): /soc/bus@52000000: node has a unit name, but no reg or ranges property
>> arch/riscv/boot/dts/canaan/k210.dtsi:352.22-406.5: Warning (simple_bus_reg): /soc/bus@50400000: missing or empty reg/ranges property
>>
>> Add reg and ranges properties that naively cap the buses after the
>> allocation of their last devices.
>>
>> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
>> ---
>> arch/riscv/boot/dts/canaan/k210.dtsi | 9 ++++++---
>> 1 file changed, 6 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
>> index 948dc235e39d..6a34dc4f3e51 100644
>> --- a/arch/riscv/boot/dts/canaan/k210.dtsi
>> +++ b/arch/riscv/boot/dts/canaan/k210.dtsi
>> @@ -163,7 +163,8 @@ apb0: bus@50200000 {
>> #address-cells = <1>;
>> #size-cells = <1>;
>> compatible = "simple-pm-bus";
>> - ranges;
>> + regs = <0x50200000 0x200000>;
>> + ranges = <0x50200000 0x50200000 0x200000>;
>
> This looks wrong.
>
> The property is called "reg" not "regs".

Yeah...

>
> And I don't think that you should provide "reg" at all,
> simply supplying "ranges" should be sufficient, no?

I don't recall why I put the regs in, I'll drop it if
possible & respond if I can't.
IIRC, it did actually complain.

>
>
> Kind regards,
> Niklas
>
>> clocks = <&sysclk K210_CLK_APB0>;
>>
>> gpio1: gpio@50200000 {
>> @@ -382,7 +383,8 @@ apb1: bus@50400000 {
>> #address-cells = <1>;
>> #size-cells = <1>;
>> compatible = "simple-pm-bus";
>> - ranges;
>> + regs = <0x50400000 0x40100>;
>> + ranges = <0x50400000 0x50400000 0x40100>;
>> clocks = <&sysclk K210_CLK_APB1>;
>>
>> wdt0: watchdog@50400000 {
>> @@ -437,7 +439,8 @@ apb2: bus@52000000 {
>> #address-cells = <1>;
>> #size-cells = <1>;
>> compatible = "simple-pm-bus";
>> - ranges;
>> + regs = <0x52000000 0x2000200>;
>> + ranges = <0x52000000 0x52000000 0x2000200>;
>> clocks = <&sysclk K210_CLK_APB2>;
>>
>> spi0: spi@52000000 {
>> --
>> 2.36.1
\
 
 \ /
  Last update: 2022-06-30 19:04    [W:0.075 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site