lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 14/15] power: axp20x_battery: Support battery status without fuel gauge
Date
Add a "has_fg" flag to indicate that the chip has a fuel gauge.
Report battery full status on chips with no fuel gauge using the
battery voltage.

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
drivers/power/supply/axp20x_battery.c | 34 ++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
index 401779d84d2b..574c1d001556 100644
--- a/drivers/power/supply/axp20x_battery.c
+++ b/drivers/power/supply/axp20x_battery.c
@@ -69,6 +69,7 @@ struct axp_data {
* must have AXP20X_CHRG_CTRL1_TGT_CURR+1 elements.
*/
const int *ccc_table;
+ bool has_fg;
bool has_fg_valid;
int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
@@ -197,7 +198,7 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
union power_supply_propval *val)
{
struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
- int ret = 0, reg, val1;
+ int ret = 0, reg, val1, val2;

switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
@@ -231,6 +232,34 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
return 0;
}

+ /*
+ * If the chip does not have a fuel gauge, we check battery full status
+ * using voltage instead.
+ */
+ if (!axp20x_batt->data->has_fg) {
+ ret = axp20x_batt->data->get_max_voltage(axp20x_batt, &val1);
+ if (ret)
+ return ret;
+
+ ret = iio_read_channel_processed(axp20x_batt->batt_v, &val2);
+ if (ret)
+ return ret;
+
+ /* IIO subsystem reports voltage in mV but we need uV */
+ val2 *= 1000;
+
+ /*
+ * According to the AXP192 datasheet, charging will restart if
+ * the battery voltage drops below V_rch = V_tgt - 0.1 V, so we
+ * report the battery is full if its voltage is at least V_rch.
+ */
+ if (val2 >= val1 - 100000)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+
ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1);
if (ret)
return ret;
@@ -552,6 +581,7 @@ static const struct power_supply_desc axp20x_batt_ps_desc = {
static const struct axp_data axp209_data = {
.ccc_scale = 100000,
.ccc_offset = 300000,
+ .has_fg = true,
.get_max_voltage = axp20x_battery_get_max_voltage,
.set_max_voltage = axp20x_battery_set_max_voltage,
};
@@ -559,6 +589,7 @@ static const struct axp_data axp209_data = {
static const struct axp_data axp221_data = {
.ccc_scale = 150000,
.ccc_offset = 300000,
+ .has_fg = true,
.has_fg_valid = true,
.get_max_voltage = axp22x_battery_get_max_voltage,
.set_max_voltage = axp22x_battery_set_max_voltage,
@@ -567,6 +598,7 @@ static const struct axp_data axp221_data = {
static const struct axp_data axp813_data = {
.ccc_scale = 200000,
.ccc_offset = 200000,
+ .has_fg = true,
.has_fg_valid = true,
.get_max_voltage = axp813_battery_get_max_voltage,
.set_max_voltage = axp20x_battery_set_max_voltage,
--
2.35.1
\
 
 \ /
  Last update: 2022-06-29 16:31    [W:0.332 / U:1.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site