lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: Fix spelling mistake
Date
Change 'timeing' to 'timing'.
Change 'Characteres' to 'Characters'.

Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
---
drivers/tty/serial/8250/8250_port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fdf21de74e90..a7ed5012b90e 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1510,7 +1510,7 @@ static inline void __stop_tx(struct uart_8250_port *p)
if (!(lsr & UART_LSR_THRE))
return;
/*
- * To provide required timeing and allow FIFO transfer,
+ * To provide required timing and allow FIFO transfer,
* __stop_tx_rs485() must be called only when both FIFO and
* shift register are empty. The device driver should either
* enable interrupt on TEMT or set UART_CAP_NOTEMT that will
@@ -2796,7 +2796,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
port->read_status_mask |= UART_LSR_BI;

/*
- * Characteres to ignore
+ * Characters to ignore
*/
port->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
--
2.34.1
\
 
 \ /
  Last update: 2022-06-29 11:44    [W:0.035 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site