lkml.org 
[lkml]   [2022]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 03/15] ASoC: dt-bindings: convert designware-i2s to dt-schema
Date
From: Conor Dooley <conor.dooley@microchip.com>

Convert the Synopsys DesignWare I2S controller binding to dt-schema.
There was no listed maintainer but Jose Abreu was the last editor of the
txt binding so add him as maintainer.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
.../bindings/sound/designware-i2s.txt | 35 -------
.../bindings/sound/snps,designware-i2s.yaml | 94 +++++++++++++++++++
2 files changed, 94 insertions(+), 35 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
create mode 100644 Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml

diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
deleted file mode 100644
index 6a536d570e29..000000000000
--- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-DesignWare I2S controller
-
-Required properties:
- - compatible : Must be "snps,designware-i2s"
- - reg : Must contain the I2S core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's
- clocks. The controller expects one clock: the clock used as the sampling
- rate reference clock sample.
- - clock-names : "i2sclk" for the sample rate reference clock.
- - dmas: Pairs of phandle and specifier for the DMA channels that are used by
- the core. The core expects one or two dma channels: one for transmit and
- one for receive.
- - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
-
-Optional properties:
- - interrupts: The interrupt line number for the I2S controller. Add this
- parameter if the I2S controller that you are using does not support DMA.
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
-properties please check:
- * resource-names.txt
- * clock/clock-bindings.txt
- * dma/dma.txt
-
-Example:
-
- soc_i2s: i2s@7ff90000 {
- compatible = "snps,designware-i2s";
- reg = <0x0 0x7ff90000 0x0 0x1000>;
- clocks = <&scpi_i2sclk 0>;
- clock-names = "i2sclk";
- #sound-dai-cells = <0>;
- dmas = <&dma0 5>;
- dma-names = "tx";
- };
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
new file mode 100644
index 000000000000..4b0795819064
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare I2S controller
+
+maintainers:
+ - Jose Abreu <joabreu@synopsys.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: canaan,k210-i2s
+ - const: snps,designware-i2s
+ - enum:
+ - snps,designware-i2s
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ The interrupt line number for the I2S controller. Add this
+ parameter if the I2S controller that you are using does not
+ support DMA.
+ maxItems: 1
+
+ clocks:
+ description: Sampling rate reference clock
+ maxItems: 1
+
+ clock-names:
+ const: i2sclk
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+ minItems: 1
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+ minItems: 1
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: canaan,k210-i2s
+
+then:
+ properties:
+ "#sound-dai-cells":
+ const: 1
+
+else:
+ properties:
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+oneOf:
+ - required:
+ - dmas
+ - dma-names
+ - required:
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ soc_i2s: i2s@7ff90000 {
+ compatible = "snps,designware-i2s";
+ reg = <0x7ff90000 0x1000>;
+ clocks = <&scpi_i2sclk 0>;
+ clock-names = "i2sclk";
+ #sound-dai-cells = <0>;
+ dmas = <&dma0 5>;
+ dma-names = "tx";
+ };
--
2.36.1
\
 
 \ /
  Last update: 2022-06-29 20:45    [W:0.216 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site