lkml.org 
[lkml]   [2022]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V15 6/9] mfd: pm8008: Use i2c_new_dummy_device() API
From

On 6/27/2022 1:11 PM, Lee Jones wrote:
> On Mon, 27 Jun 2022, Satya Priya Kakitapalli (Temp) wrote:
>
>> Hi Lee,
>>
>>
>> On 6/20/2022 4:37 PM, Satya Priya Kakitapalli (Temp) wrote:
>>> On 6/20/2022 1:50 PM, Lee Jones wrote:
>>>> On Mon, 20 Jun 2022, Satya Priya Kakitapalli (Temp) wrote:
>>>>
>>>>> On 6/17/2022 2:27 AM, Lee Jones wrote:
>>>>>> On Tue, 14 Jun 2022, Satya Priya wrote:
>>>>>>
>>>>>>> Use i2c_new_dummy_device() to register pm8008-regulator
>>>>>>> client present at a different address space, instead of
>>>>>>> defining a separate DT node. This avoids calling the probe
>>>>>>> twice for the same chip, once for each client pm8008-infra
>>>>>>> and pm8008-regulator.
>>>>>>>
>>>>>>> As a part of this define pm8008_regmap_init() to do regmap
>>>>>>> init for both the clients and define pm8008_get_regmap() to
>>>>>>> pass the regmap to the regulator driver.
>>>>>>>
>>>>>>> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
>>>>>>> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
>>>>>>> ---
>>>>>>> Changes in V15:
>>>>>>>    - None.
>>>>>>>
>>>>>>> Changes in V14:
>>>>>>>    - None.
>>>>>>>
>>>>>>> Changes in V13:
>>>>>>>    - None.
>>>>>>>
>>>>>>>    drivers/mfd/qcom-pm8008.c       | 34
>>>>>>> ++++++++++++++++++++++++++++++++--
>>>>>>>    include/linux/mfd/qcom_pm8008.h |  9 +++++++++
>>>>>>>    2 files changed, 41 insertions(+), 2 deletions(-)
>>>>>>>    create mode 100644 include/linux/mfd/qcom_pm8008.h
>>>>>>>
>>>>>>> diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
>>>>>>> index 569ffd50..55e2a8e 100644
>>>>>>> --- a/drivers/mfd/qcom-pm8008.c
>>>>>>> +++ b/drivers/mfd/qcom-pm8008.c
>>>>>>> @@ -9,6 +9,7 @@
>>>>>>>    #include <linux/interrupt.h>
>>>>>>>    #include <linux/irq.h>
>>>>>>>    #include <linux/irqdomain.h>
>>>>>>> +#include <linux/mfd/qcom_pm8008.h>
>>>>>>>    #include <linux/module.h>
>>>>>>>    #include <linux/of_device.h>
>>>>>>>    #include <linux/of_platform.h>
>>>>>>> @@ -57,6 +58,7 @@ enum {
>>>>>>>    struct pm8008_data {
>>>>>>>        struct device *dev;
>>>>>>> +    struct regmap *regulators_regmap;
>>>>>>>        int irq;
>>>>>>>        struct regmap_irq_chip_data *irq_data;
>>>>>>>    };
>>>>>>> @@ -150,6 +152,12 @@ static struct regmap_config
>>>>>>> qcom_mfd_regmap_cfg = {
>>>>>>>        .max_register    = 0xFFFF,
>>>>>>>    };
>>>>>>> +struct regmap *pm8008_get_regmap(const struct pm8008_data *chip)
>>>>>>> +{
>>>>>>> +    return chip->regulators_regmap;
>>>>>>> +}
>>>>>>> +EXPORT_SYMBOL_GPL(pm8008_get_regmap);
>>>>>> Seems like abstraction for the sake of abstraction.
>>>>>>
>>>>>> Why not do the dereference inside the regulator driver?
>>>>> To derefer this in the regulator driver, we need to have the
>>>>> pm8008_data
>>>>> struct definition in the qcom_pm8008 header file.
>>>>>
>>>>> I think it doesn't look great to have only that structure in
>>>>> header and all
>>>>> other structs and enum in the mfd driver.
>>>> Then why pass 'pm8008_data' at all?
>>>
>>> There is one more option, instead of passing the pm8008_data, we could
>>> pass the pdev->dev.parent and get the pm8008 chip data directly in the
>>> pm8008_get_regmap() like below
>>>
>>>
>>> struct regmap *pm8008_get_regmap(const struct device *dev)
>>>  {
>>>      const struct pm8008_data *chip = dev_get_drvdata(dev);
>>>
>>>      return chip->regulators_regmap;
>>> }
>>> EXPORT_SYMBOL_GPL(pm8008_get_regmap);
>>>
>>>
>>> By doing this we can avoid having declaration of pm8008_data also in the
>>> header. Please let me know if this looks good.
>>>
>> Could you please confirm on this?
>>
>>>> What's preventing you from passing 'regmap'?
>>>
>>> I didn't get what you meant here, could you please elaborate a bit?
> Ah yes. I authored you a patch, but became distracted. Here:
>
> -----8<--------------------8<-------
>
> From: Lee Jones <lee.jones@linaro.org>
>
> mfd: pm8008: Remove driver data structure pm8008_data
>
> Maintaining a local driver data structure that is never shared
> outside of the core device is an unnecessary complexity. Half of the
> attributes were not used outside of a single function, one of which
> was not used at all. The remaining 2 are generic and can be passed
> around as required.


Okay, but we still need to store the regulators_regmap, which is
required in the pm8008 regulator driver. Could we use a global variable
for it?


> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
> drivers/mfd/qcom-pm8008.c | 53 ++++++++++++++++++-----------------------------
> 1 file changed, 20 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
> index c472d7f8103c4..4b8ff947762f2 100644
> --- a/drivers/mfd/qcom-pm8008.c
> +++ b/drivers/mfd/qcom-pm8008.c
> @@ -54,13 +54,6 @@ enum {
>
> #define PM8008_PERIPH_OFFSET(paddr) (paddr - PM8008_PERIPH_0_BASE)
>
> -struct pm8008_data {
> - struct device *dev;
> - struct regmap *regmap;
> - int irq;
> - struct regmap_irq_chip_data *irq_data;
> -};
> -
> static unsigned int p0_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_0_BASE)};
> static unsigned int p1_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_1_BASE)};
> static unsigned int p2_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_2_BASE)};
> @@ -150,7 +143,7 @@ static struct regmap_config qcom_mfd_regmap_cfg = {
> .max_register = 0xFFFF,
> };
>
> -static int pm8008_init(struct pm8008_data *chip)
> +static int pm8008_init(struct regmap *regmap)
> {
> int rc;
>
> @@ -160,34 +153,31 @@ static int pm8008_init(struct pm8008_data *chip)
> * This is required to enable the writing of TYPE registers in
> * regmap_irq_sync_unlock().
> */
> - rc = regmap_write(chip->regmap,
> - (PM8008_TEMP_ALARM_ADDR | INT_SET_TYPE_OFFSET),
> - BIT(0));
> + rc = regmap_write(regmap, (PM8008_TEMP_ALARM_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
> if (rc)
> return rc;
>
> /* Do the same for GPIO1 and GPIO2 peripherals */
> - rc = regmap_write(chip->regmap,
> - (PM8008_GPIO1_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
> + rc = regmap_write(regmap, (PM8008_GPIO1_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
> if (rc)
> return rc;
>
> - rc = regmap_write(chip->regmap,
> - (PM8008_GPIO2_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
> + rc = regmap_write(regmap, (PM8008_GPIO2_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
>
> return rc;
> }
>
> -static int pm8008_probe_irq_peripherals(struct pm8008_data *chip,
> +static int pm8008_probe_irq_peripherals(struct device *dev,
> + struct regmap *regmap,
> int client_irq)
> {
> int rc, i;
> struct regmap_irq_type *type;
> struct regmap_irq_chip_data *irq_data;
>
> - rc = pm8008_init(chip);
> + rc = pm8008_init(regmap);
> if (rc) {
> - dev_err(chip->dev, "Init failed: %d\n", rc);
> + dev_err(dev, "Init failed: %d\n", rc);
> return rc;
> }
>
> @@ -207,10 +197,10 @@ static int pm8008_probe_irq_peripherals(struct pm8008_data *chip,
> IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
> }
>
> - rc = devm_regmap_add_irq_chip(chip->dev, chip->regmap, client_irq,
> + rc = devm_regmap_add_irq_chip(dev, regmap, client_irq,
> IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data);
> if (rc) {
> - dev_err(chip->dev, "Failed to add IRQ chip: %d\n", rc);
> + dev_err(dev, "Failed to add IRQ chip: %d\n", rc);
> return rc;
> }
>
> @@ -220,26 +210,23 @@ static int pm8008_probe_irq_peripherals(struct pm8008_data *chip,
> static int pm8008_probe(struct i2c_client *client)
> {
> int rc;
> - struct pm8008_data *chip;
> -
> - chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
> - if (!chip)
> - return -ENOMEM;
> + struct device *dev;
> + struct regmap *regmap;
>
> - chip->dev = &client->dev;
> - chip->regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
> - if (!chip->regmap)
> + dev = &client->dev;
> + regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
> + if (!regmap)
> return -ENODEV;
>
> - i2c_set_clientdata(client, chip);
> + i2c_set_clientdata(client, regmap);
>
> - if (of_property_read_bool(chip->dev->of_node, "interrupt-controller")) {
> - rc = pm8008_probe_irq_peripherals(chip, client->irq);
> + if (of_property_read_bool(dev->of_node, "interrupt-controller")) {
> + rc = pm8008_probe_irq_peripherals(dev, regmap, client->irq);
> if (rc)
> - dev_err(chip->dev, "Failed to probe irq periphs: %d\n", rc);
> + dev_err(dev, "Failed to probe irq periphs: %d\n", rc);
> }
>
> - return devm_of_platform_populate(chip->dev);
> + return devm_of_platform_populate(dev);
> }
>
> static const struct of_device_id pm8008_match[] = {
>

\
 
 \ /
  Last update: 2022-06-28 06:54    [W:0.164 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site