lkml.org 
[lkml]   [2022]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v14 05/10] iio: adc: qcom-spmi-rradc: introduce round robin adc
From


On 01/05/2022 18:38, Jonathan Cameron wrote:
> On Fri, 29 Apr 2022 23:09:00 +0100
> Caleb Connolly <caleb.connolly@linaro.org> wrote:
>
>> The Round Robin ADC is responsible for reading data about the rate of
>> charge from the USB or DC input ports, it can also read the battery
>> ID (resistence), skin temperature and the die temperature of the pmic.
>> It is found on the PMI8998 and PM660 Qualcomm PMICs.
>>
>> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
> Hi Caleb,
Hi Jonathan,

Thanks for spotting this, I completely missed it... Yeah this should be
IIO_INFO_PROCESSED, the battery ID calculation doesn't fit in the
raw/offset/scale format.
>
> I took another quick read through of this and noticed that the battery channel
> is providing on IIO_INFO_RAW but there is code for IIO_INFO_PROCESSED.
>
> Something gone wrong along the way? If all we need is to change it to
> BIT(IIO_INFO_PROCESSED) I can do that whilst applying or you can do a v15 if
> you prefer.
That would be hugely appreciated, thanks a lot.
>
> Thanks,
>
> Jonathan
>
>> ---
>
>> diff --git a/drivers/iio/adc/qcom-spmi-rradc.c b/drivers/iio/adc/qcom-spmi-rradc.c
>> new file mode 100644
>> index 000000000000..c437546d8a4c
>> --- /dev/null
>> +++ b/drivers/iio/adc/qcom-spmi-rradc.c
>
>
> ..
>
>> +
>> +/*
>> + * These functions explicitly cast int64_t to int.
>> + * They will never overflow, as the values are small enough.
>
> See below. I don't think this gets used...
>
>> + */
>> +static int rradc_post_process_batt_id(struct rradc_chip *chip, u16 adc_code,
>> + int *result_ohms)
>> +{
>> + uint32_t current_value;
>> + int64_t r_id;
>> +
>> + current_value = chip->batt_id_data;
>> + r_id = ((int64_t)adc_code * RR_ADC_FS_VOLTAGE_MV);
>> + r_id = div64_s64(r_id, (RR_ADC_CHAN_MSB * current_value));
>> + *result_ohms = (int)(r_id * MILLI);
>> +
>> + return 0;
>> +}
>> +
>
>
>> +
>> +static int rradc_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan_spec, int *val,
>> + int *val2, long mask)
>> +{
>> + struct rradc_chip *chip = iio_priv(indio_dev);
>> + const struct rradc_channel *chan;
>> + int ret;
>> + u16 adc_code;
>> +
>> + if (chan_spec->address >= RR_ADC_CHAN_MAX) {
>> + dev_err(chip->dev, "Invalid channel index:%lu\n",
>> + chan_spec->address);
>> + return -EINVAL;
>> + }
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_SCALE:
>> + return rradc_read_scale(chip, chan_spec->address, val, val2);
>> + case IIO_CHAN_INFO_OFFSET:
>> + return rradc_read_offset(chip, chan_spec->address, val);
>> + case IIO_CHAN_INFO_RAW:
>> + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code);
>> + if (ret < 0)
>> + return ret;
>> +
>> + *val = adc_code;
>> + return IIO_VAL_INT;
>> + case IIO_CHAN_INFO_PROCESSED:
>
> This doesn't seem to apply to any channels....
>
>> + chan = &rradc_chans[chan_spec->address];
>> + if (!chan->scale_fn)
>> + return -EINVAL;
>> + ret = rradc_do_conversion(chip, chan_spec->address, &adc_code);
>> + if (ret < 0)
>> + return ret;
>> +
>> + *val = chan->scale_fn(chip, adc_code, val);
>> + return IIO_VAL_INT;
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static int rradc_read_label(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan, char *label)
>> +{
>> + return snprintf(label, PAGE_SIZE, "%s\n",
>> + rradc_chans[chan->address].label);
>> +}
>> +
>> +static const struct iio_info rradc_info = {
>> + .read_raw = rradc_read_raw,
>> + .read_label = rradc_read_label,
>> +};
>> +
>> +static const struct rradc_channel rradc_chans[RR_ADC_CHAN_MAX] = {
>> + {
>> + .label = "batt_id",
>> + .scale_fn = rradc_post_process_batt_id,
>> + .lsb = RR_ADC_BATT_ID_5_LSB,
>> + .status = RR_ADC_BATT_ID_STS,
>> + .size = 6,
>> + .trigger_addr = RR_ADC_BATT_ID_TRIGGER,
>> + .trigger_mask = BIT(0),
>> + }, {
>> + .label = "batt",
>> + .lsb = RR_ADC_BATT_THERM_LSB,
>> + .status = RR_ADC_BATT_THERM_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_BATT_THERM_TRIGGER,
>> + }, {
>> + .label = "pmi8998_skin",
>> + .lsb = RR_ADC_SKIN_TEMP_LSB,
>> + .status = RR_ADC_AUX_THERM_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_AUX_THERM_TRIGGER,
>> + }, {
>> + .label = "usbin_i",
>> + .lsb = RR_ADC_USB_IN_I_LSB,
>> + .status = RR_ADC_USB_IN_I_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_USB_IN_I_TRIGGER,
>> + }, {
>> + .label = "usbin_v",
>> + .lsb = RR_ADC_USB_IN_V_LSB,
>> + .status = RR_ADC_USB_IN_V_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_USB_IN_V_TRIGGER,
>> + .trigger_mask = BIT(7),
>> + }, {
>> + .label = "dcin_i",
>> + .lsb = RR_ADC_DC_IN_I_LSB,
>> + .status = RR_ADC_DC_IN_I_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_DC_IN_I_TRIGGER,
>> + }, {
>> + .label = "dcin_v",
>> + .lsb = RR_ADC_DC_IN_V_LSB,
>> + .status = RR_ADC_DC_IN_V_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_DC_IN_V_TRIGGER,
>> + }, {
>> + .label = "pmi8998_die",
>> + .lsb = RR_ADC_PMI_DIE_TEMP_LSB,
>> + .status = RR_ADC_PMI_DIE_TEMP_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_PMI_DIE_TEMP_TRIGGER,
>> + .trigger_mask = RR_ADC_TRIGGER_EVERY_CYCLE,
>> + }, {
>> + .label = "chg",
>> + .lsb = RR_ADC_CHARGER_TEMP_LSB,
>> + .status = RR_ADC_CHARGER_TEMP_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_CHARGER_TEMP_TRIGGER,
>> + }, {
>> + .label = "gpio",
>> + .lsb = RR_ADC_GPIO_LSB,
>> + .status = RR_ADC_GPIO_STS,
>> + .size = 2,
>> + .trigger_addr = RR_ADC_GPIO_TRIGGER,
>> + },
>> +};
>> +
>> +static const struct iio_chan_spec rradc_iio_chans[RR_ADC_CHAN_MAX] = {
>> + {
>> + .type = IIO_RESISTANCE,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
>> + .address = RR_ADC_BATT_ID,
>> + .channel = 0,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_TEMP,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
>> + .address = RR_ADC_BATT_THERM,
>> + .channel = 0,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_TEMP,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE) |
>> + BIT(IIO_CHAN_INFO_OFFSET),
>> + .address = RR_ADC_SKIN_TEMP,
>> + .channel = 1,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_CURRENT,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE),
>> + .address = RR_ADC_USBIN_I,
>> + .channel = 0,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_VOLTAGE,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE),
>> + .address = RR_ADC_USBIN_V,
>> + .channel = 0,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_CURRENT,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE),
>> + .address = RR_ADC_DCIN_I,
>> + .channel = 1,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_VOLTAGE,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE),
>> + .address = RR_ADC_DCIN_V,
>> + .channel = 1,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_TEMP,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE) |
>> + BIT(IIO_CHAN_INFO_OFFSET),
>> + .address = RR_ADC_DIE_TEMP,
>> + .channel = 2,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_TEMP,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_OFFSET) |
>> + BIT(IIO_CHAN_INFO_SCALE),
>> + .address = RR_ADC_CHG_TEMP,
>> + .channel = 3,
>> + .indexed = 1,
>> + }, {
>> + .type = IIO_VOLTAGE,
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>> + BIT(IIO_CHAN_INFO_SCALE),
>> + .address = RR_ADC_GPIO,
>> + .channel = 2,
>> + .indexed = 1,
>> + },
>> +};
>> +
>

--
Kind Regards,
Caleb (they/he)

\
 
 \ /
  Last update: 2022-05-09 13:55    [W:0.103 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site