lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 13/13] ARM: dts: kswitch-d10: enable networking
Date
Enable all the necessary network related nodes, wire the pinctrl
configurations, add the PHYs and connect them to the corresponding
network ports.

Signed-off-by: Michael Walle <michael@walle.cc>
---
...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts | 16 +++
.../lan966x-kontron-kswitch-d10-mmt-8g.dts | 26 +++++
.../dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 97 +++++++++++++++++++
3 files changed, 139 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
index 7b12cbe11c58..0f555eb45bda 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -76,3 +76,19 @@ fc4_b_pins: fc4-b-i2c-pins {
function = "fc4_b";
};
};
+
+&port2 {
+ phys = <&serdes 2 SERDES6G(0)>;
+ sfp = <&sfp0>;
+ managed = "in-band-status";
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+&port3 {
+ phys = <&serdes 3 SERDES6G(1)>;
+ sfp = <&sfp1>;
+ managed = "in-band-status";
+ phy-mode = "sgmii";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
index 4b35f6c46e7f..5feef9a59a79 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -11,3 +11,29 @@ / {
compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
"microchip,lan9668", "microchip,lan966";
};
+
+&mdio0 {
+ phy2: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ phy3: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&port2 {
+ phys = <&serdes 2 SERDES6G(0)>;
+ phy-handle = <&phy2>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+};
+
+&port3 {
+ phys = <&serdes 3 SERDES6G(1)>;
+ phy-handle = <&phy3>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
index 4c1ebb4aa5b0..4cab1b3b3b29 100644
--- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -5,6 +5,7 @@

/dts-v1/;
#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"

/ {
aliases {
@@ -52,6 +53,12 @@ fc3_b_pins: fc3-b-pins {
function = "fc3_b";
};

+ miim_c_pins: miim-c-pins {
+ /* MDC, MDIO */
+ pins = "GPIO_59", "GPIO_60";
+ function = "miim_c";
+ };
+
sgpio_a_pins: sgpio-a-pins {
/* SCK, D0, D1 */
pins = "GPIO_32", "GPIO_33", "GPIO_34";
@@ -71,6 +78,92 @@ usart0_pins: usart0-pins {
};
};

+&mdio0 {
+ pinctrl-0 = <&miim_c_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ clock-frequency = <2500000>;
+ status = "okay";
+
+ phy4: ethernet-phy@5 {
+ reg = <5>;
+ coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy5: ethernet-phy@6 {
+ reg = <6>;
+ coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy6: ethernet-phy@7 {
+ reg = <7>;
+ coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy7: ethernet-phy@8 {
+ reg = <8>;
+ coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+&phy0 {
+ status = "okay";
+};
+
+&phy1 {
+ status = "okay";
+};
+
+&port0 {
+ phys = <&serdes 0 CU(0)>;
+ phy-handle = <&phy0>;
+ phy-mode = "gmii";
+ status = "okay";
+};
+
+&port1 {
+ phys = <&serdes 1 CU(1)>;
+ phy-handle = <&phy1>;
+ phy-mode = "gmii";
+ status = "okay";
+};
+
+&port4 {
+ phys = <&serdes 4 SERDES6G(2)>;
+ phy-handle = <&phy4>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&port5 {
+ phys = <&serdes 5 SERDES6G(2)>;
+ phy-handle = <&phy5>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&port6 {
+ phys = <&serdes 6 SERDES6G(2)>;
+ phy-handle = <&phy6>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&port7 {
+ phys = <&serdes 7 SERDES6G(2)>;
+ phy-handle = <&phy7>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
&sgpio {
pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
pinctrl-names = "default";
@@ -88,6 +181,10 @@ sgpio_out: gpio@1 {
};
};

+&switch {
+ status = "okay";
+};
+
&watchdog {
status = "okay";
};
--
2.30.2
\
 
 \ /
  Last update: 2022-05-03 00:42    [W:0.236 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site