lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 09/13] ARM: dts: lan966x: add MIIM nodes
Date
Add the MDIO controller nodes. The integrated PHYs are connected to the
second controller. This controller also takes care of the resets of the
integrated PHYs, thus it has two memory regions. The first controller
is routed to the external MDIO/MDC pins.

By default, they are disabled.

Signed-off-by: Michael Walle <michael@walle.cc>
---
arch/arm/boot/dts/lan966x.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 64290fb43926..0442735910da 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -418,6 +418,37 @@ gpio: pinctrl@e2004064 {
#interrupt-cells = <2>;
};

+ mdio0: mdio@e2004118 {
+ compatible = "microchip,lan966x-miim";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe2004118 0x24>;
+ clocks = <&sys_clk>;
+ status = "disabled";
+ };
+
+ mdio1: mdio@e200413c {
+ compatible = "microchip,lan966x-miim";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe200413c 0x24>,
+ <0xe2010020 0x4>;
+ clocks = <&sys_clk>;
+ status = "disabled";
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ phy1: ethernet-phy@2 {
+ reg = <2>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
sgpio: gpio@e2004190 {
compatible = "microchip,sparx5-sgpio";
reg = <0xe2004190 0x118>;
--
2.30.2
\
 
 \ /
  Last update: 2022-05-03 00:42    [W:0.161 / U:2.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site