lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 03/13] ARM: dts: lan966x: add missing uart DMA channel
Date
The usart node of the flexcom3 block is missing the DMA channels. Add
it.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/lan966x.dtsi | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 4c7beebbd1ef..e9d6c16d04cf 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -144,6 +144,9 @@ usart3: serial@200 {
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+ <&dma0 AT91_XDMAC_DT_PERID(8)>;
+ dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
--
2.30.2
\
 
 \ /
  Last update: 2022-05-03 00:42    [W:0.197 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site