lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support
Date
Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
---
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index e9c8df9..e747ec0 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -249,6 +249,21 @@
status = "okay";
};

+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ /* ico and efs2 partitions are secured */
+ secure-regions = /bits/ 64 <0x500000 0x500000
+ 0xa00000 0xb00000>;
+ };
+};
+
&usb {
status = "okay";
};
--
2.7.4
\
 
 \ /
  Last update: 2022-05-02 19:09    [W:0.042 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site