lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 5/5] mtd: ubi: block: add option to enable scanning for partitions
Add Kconfig option CONFIG_MTD_UBI_BLOCK_PARTITIONS and enable block
partition parsers on ubiblock devices in case it is selected.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/mtd/ubi/Kconfig | 10 ++++++++++
drivers/mtd/ubi/block.c | 5 ++++-
2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 2ed77b7b3fcb56..491330e42ab201 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -104,4 +104,14 @@ config MTD_UBI_BLOCK

If in doubt, say "N".

+config MTD_UBI_BLOCK_PARTITIONS
+ bool "Scan UBI block devices for partitions"
+ default y if FIT_PARTITION
+ depends on MTD_UBI_BLOCK
+ help
+ Scan UBI block devices for partitions (ie. MBR, GPT, uImage.FIT, ...).
+
+ Unless your UBI volumes contain sub-partitions mapped using a partition
+ table, say no.
+
endif # MTD_UBI
diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c
index 18683d1c1bf501..196a95e77a7747 100644
--- a/drivers/mtd/ubi/block.c
+++ b/drivers/mtd/ubi/block.c
@@ -431,7 +431,10 @@ int ubiblock_create(struct ubi_volume_info *vi)
ret = -ENODEV;
goto out_cleanup_disk;
}
- gd->flags |= GENHD_FL_NO_PART;
+
+ if (!IS_ENABLED(CONFIG_MTD_UBI_BLOCK_PARTITIONS))
+ gd->flags |= GENHD_FL_NO_PART;
+
gd->private_data = dev;
sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id);
set_capacity(gd, disk_capacity);
--
2.36.0
\
 
 \ /
  Last update: 2022-05-02 18:22    [W:0.028 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site