lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support
On Mon, May 02, 2022 at 07:14:38AM -0700, Kaushal Kumar wrote:
> Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board.
>
> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>

One comment below, with that fixed:

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> arch/arm/boot/dts/qcom-sdx65-mtp.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> index 153ad2a..b0027c1 100644
> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> @@ -249,6 +249,21 @@
> status = "ok";
> };
>
> +&qpic_nand {
> + status = "ok";
> +

Status should be "okay".

Thanks,
Mani

> + nand@0 {
> + reg = <0>;
> +
> + nand-ecc-strength = <4>;
> + nand-ecc-step-size = <512>;
> + nand-bus-width = <8>;
> + /* ico and efs2 partitions are secured */
> + secure-regions = /bits/ 64 <0x500000 0x500000
> + 0xa00000 0xb00000>;
> + };
> +};
> +
> &usb {
> status = "okay";
> };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2022-05-02 16:58    [W:0.059 / U:23.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site