lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 3/4] soc: imx: imx8m-blk-ctrl: Add reset bits for mipi dsi phy
From
Date
Am Montag, dem 02.05.2022 um 12:02 +0200 schrieb Viraj Shah:
> As per reference manual page 3903, bit 16 (GPR_MIPI_S_RESETN)
> as well as 17 (GPR_MIPI_M_RESETN) are the reset masks for mipi phy reset
> mask.

Nack. The MIPI-S reset is used for the CSI receiver and is already
handled by the appropriate power domain.

Regards,
Lucas

>
> Signed-off-by: Viraj Shah <viraj.shah@linutronix.de>
> ---
> drivers/soc/imx/imx8m-blk-ctrl.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index ca63fd30e70a..d7638b7fa99d 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -502,7 +502,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
> .gpc_name = "mipi-dsi",
> .rst_mask = BIT(5),
> .clk_mask = BIT(8) | BIT(9),
> - .mipi_phy_rst_mask = BIT(17),
> + .mipi_phy_rst_mask = BIT(17) | BIT(16),
> },
> [IMX8MM_DISPBLK_PD_MIPI_CSI] = {
> .name = "dispblk-mipi-csi",


\
 
 \ /
  Last update: 2022-05-02 12:14    [W:0.030 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site