lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 0/4] mainline Protonic PRTT1x boards
From
Hi Oleksij

On 4/26/22 09:35, Oleksij Rempel wrote:
> changes v4:
> - reorder prtt1X compatible again
> - remove spaces in stm32mp151a-prtt1c.dts
>
> changes v3:
> - add silabs,wfx compatible
> - move spi pin configuration to stm32mp15-pinctrl.dtsi
> - move prtt1X compatible in alphabetical order
> - add watchdog and thermal nodes
>
> changes v2:
> - cleanup mmc nodes
> - disabled dma for uart4 (this is console interface and it should work
> as simple as possible)
>
> Oleksij Rempel (4):
> dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
> boards
> dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
> ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
> ARM: dts: stm32: add support for Protonic PRTT1x boards
>
> .../devicetree/bindings/arm/stm32/stm32.yaml | 8 +
> .../staging/net/wireless/silabs,wfx.yaml | 1 +
> arch/arm/boot/dts/Makefile | 3 +
> arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 15 +
> arch/arm/boot/dts/stm32mp151a-prtt1a.dts | 52 +++
> arch/arm/boot/dts/stm32mp151a-prtt1c.dts | 304 ++++++++++++++++++
> arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi | 229 +++++++++++++
> arch/arm/boot/dts/stm32mp151a-prtt1s.dts | 63 ++++
> 8 files changed, 675 insertions(+)
> create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
> create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
> create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
> create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts
>

Series applied on stm32-next.

Regards
Alex

\
 
 \ /
  Last update: 2022-05-02 10:42    [W:0.042 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site