lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 01/11] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
Date
This is compatible with the current driver and addresses issues when
running 'make dt_binding_check'.

Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++----
arch/arm/boot/dts/aspeed-g5.dtsi | 9 +++------
arch/arm/boot/dts/aspeed-g6.dtsi | 9 +++------
3 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index fa8b581c3d6c..3b7b98e787e7 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,8 +54,7 @@ ahb {
ranges;

fmc: spi@1e620000 {
- reg = < 0x1e620000 0x94
- 0x20000000 0x10000000 >;
+ reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-fmc";
@@ -91,8 +90,7 @@ flash@4 {
};

spi: spi@1e630000 {
- reg = < 0x1e630000 0x18
- 0x30000000 0x10000000 >;
+ reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-spi";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 4147b397c883..1e727cbaab14 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -55,8 +55,7 @@ ahb {
ranges;

fmc: spi@1e620000 {
- reg = < 0x1e620000 0xc4
- 0x20000000 0x10000000 >;
+ reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-fmc";
@@ -84,8 +83,7 @@ flash@2 {
};

spi1: spi@1e630000 {
- reg = < 0x1e630000 0xc4
- 0x30000000 0x08000000 >;
+ reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
@@ -106,8 +104,7 @@ flash@1 {
};

spi2: spi@1e631000 {
- reg = < 0x1e631000 0xc4
- 0x38000000 0x08000000 >;
+ reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 3d5ce9da42c3..6ae5dfecbdf1 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -95,8 +95,7 @@ gic: interrupt-controller@40461000 {
};

fmc: spi@1e620000 {
- reg = < 0x1e620000 0xc4
- 0x20000000 0x10000000 >;
+ reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2600-fmc";
@@ -124,8 +123,7 @@ flash@2 {
};

spi1: spi@1e630000 {
- reg = < 0x1e630000 0xc4
- 0x30000000 0x10000000 >;
+ reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2600-spi";
@@ -146,8 +144,7 @@ flash@1 {
};

spi2: spi@1e631000 {
- reg = < 0x1e631000 0xc4
- 0x50000000 0x10000000 >;
+ reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2600-spi";
--
2.35.1
\
 
 \ /
  Last update: 2022-05-02 10:15    [W:0.091 / U:5.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site