lkml.org 
[lkml]   [2022]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
From
Date
On Sun, 2022-05-01 at 17:32 +0300, Maxim Levitsky wrote:
> On Sun, 2022-05-01 at 17:28 +0300, Maxim Levitsky wrote:
> > On Fri, 2022-04-29 at 16:01 +0000, Sean Christopherson wrote:
> > > On Fri, Apr 29, 2022, Paolo Bonzini wrote:
> > > > On 4/29/22 16:42, Sean Christopherson wrote:
> > > > > On Fri, Apr 29, 2022, Paolo Bonzini wrote:
> > > > > > On 4/29/22 16:24, Sean Christopherson wrote:
> > > > > > > I don't love the divergent memslot behavior, but it's technically correct, so I
> > > > > > > can't really argue. Do we want to "officially" document the memslot behavior?
> > > > > > >
> > > > > >
> > > > > > I don't know what you mean by officially document,
> > > > >
> > > > > Something in kvm/api.rst under KVM_SET_USER_MEMORY_REGION.
> > > >
> > > > Not sure if the API documentation is the best place because userspace does
> > > > not know whether shadow paging is on (except indirectly through other
> > > > capabilities, perhaps)?
> > >
> > > Hrm, true, it's not like the userspace VMM can rewrite itself at runtime.
> > >
> > > > It could even be programmatic, such as returning 52 for CPUID[0x80000008].
> > > > A nested KVM on L1 would not be able to use the #PF(RSVD) trick to detect
> > > > MMIO faults. That's not a big price to pay, however I'm not sure it's a
> > > > good idea in general...
> > >
> > > Agreed, messing with CPUID is likely to end in tears.
> > >
> >
> > Also I can reproduce it all the way to 5.14 kernel (last kernel I have installed in this VM).
> >
> > I tested kvm/queue as of today, sadly I still see the warning.
>
> Due to a race, the above statements are out of order ;-)


So futher investigation shows that the trigger for this *is* cpu_pm=on :(

So this is enough to trigger the warning when run in the guest:

qemu-system-x86_64 -nodefaults -vnc none -serial stdio -machine accel=kvm -kernel x86/dummy.flat -machine kernel-irqchip=on -smp 8 -m 1g -cpu host -overcommit cpu-pm=on


'-smp 8' is needed, and the more vCPUs the more often the warning appears.


Due to non atomic memslot update bug, I use patched qemu version, with an attached hack,
to pause/resume vcpus around the memslot update it does, but even without this hack,
you can just ctrl+c the test after it gets the KVM internal error, and
then tdp mmu memory leak warning shows up (not always but very often).


Oh, and if I run the above command on the bare metal, it never terminates. Must be due to preemption,
qemu shows beeing stuck in kvm_vcpu_block. AVIC disabled, kvm/queue.
Bugs, bugs, and features :)

Best regards,
Maxim Levitsky


>
> Best regards,
> Maxim Levitsky
>
>
> > [mlevitsk@fedora34 ~]$[ 35.205241] ------------[ cut here ]------------
> > [ 35.207156] WARNING: CPU: 6 PID: 3236 at arch/x86/kvm/mmu/tdp_mmu.c:46 kvm_mmu_uninit_tdp_mmu+0x47/0x50 [kvm]
> > [ 35.211468] Modules linked in: uinput snd_seq_dummy snd_hrtimer xt_MASQUERADE xt_conntrack ipt_REJECT ip6table_filter ip6_tables iptable_mangle iptable_nat nf_nat bridge rpcsec_gss_krb5 auth_rpcgss
> > nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc vfat fat snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_hda_codec kvm_amd snd_hwdep ccp snd_hda_core rng_core snd_seq kvm
> > snd_seq_device snd_pcm joydev irqbypass snd_timer input_leds snd lpc_ich virtio_input mfd_core pcspkr efi_pstore rtc_cmos button ext4 mbcache jbd2 hid_generic usbhid hid virtio_gpu virtio_dma_buf
> > drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec virtio_net net_failover drm virtio_console failover i2c_core virtio_blk crc32_pclmul xhci_pci crc32c_intel xhci_hcd virtio_pci
> > virtio_pci_modern_dev virtio_ring virtio dm_mirror dm_region_hash dm_log fuse ipv6 autofs4
> > [ 35.248745] CPU: 6 PID: 3236 Comm: CPU 2/KVM Not tainted 5.14.0.stable #90
> > [ 35.251559] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
> > [ 35.255011] RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x47/0x50 [kvm]
> > [ 35.257531] Code: 48 89 e5 48 39 c2 75 21 48 8b 87 b0 91 00 00 48 81 c7 b0 91 00 00 48 39 f8 75 08 e8 b3 7c cd e0 5d c3 c3 90 0f 0b 90 eb f2 90 <0f> 0b 90 eb d9 0f 1f 40 00 0f 1f 44 00 00 55 b8 ff
> > ff ff ff 48 89
> > [ 35.265355] RSP: 0018:ffffc90001f6fc28 EFLAGS: 00010283
> > [ 35.267659] RAX: ffffc90001f5a1c0 RBX: 0000000000000008 RCX: 0000000000000000
> > [ 35.270823] RDX: ffff888114168958 RSI: ffff888115636ac0 RDI: ffffc90001f51000
> > [ 35.273769] RBP: ffffc90001f6fc28 R08: 0000000000004802 R09: 0000000000000000
> > [ 35.276595] R10: 00000000000001cd R11: 0000000000000018 R12: ffffc90001f51000
> > [ 35.279470] R13: ffffc90001f51998 R14: ffff8881001d3060 R15: dead000000000100
> > [ 35.282314] FS: 0000000000000000(0000) GS:ffff88846ef80000(0000) knlGS:0000000000000000
> > [ 35.285594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > [ 35.287943] CR2: 0000000000000000 CR3: 0000000002a0b000 CR4: 0000000000350ee0
> > [ 35.290979] Call Trace:
> > [ 35.292082] kvm_mmu_uninit_vm+0x22/0x30 [kvm]
> > [ 35.293909] kvm_arch_destroy_vm+0x18f/0x200 [kvm]
> > [ 35.295884] kvm_destroy_vm+0x164/0x250 [kvm]
> > [ 35.297680] kvm_put_kvm+0x26/0x40 [kvm]
> > [ 35.299309] kvm_vm_release+0x22/0x30 [kvm]
> > [ 35.301088] __fput+0x94/0x240
> > [ 35.302338] ____fput+0xe/0x10
> > [ 35.303599] task_work_run+0x63/0xa0
> > [ 35.305083] do_exit+0x353/0x9d0
> > [ 35.306470] do_group_exit+0x3b/0xa0
> > [ 35.307882] get_signal+0x163/0x850
> > [ 35.309403] arch_do_signal_or_restart+0xf3/0x7c0
> > [ 35.311390] exit_to_user_mode_prepare+0x112/0x1f0
> > [ 35.313374] syscall_exit_to_user_mode+0x18/0x40
> > [ 35.315244] do_syscall_64+0x44/0xb0
> > [ 35.316819] entry_SYSCALL_64_after_hwframe+0x44/0xae
> > [ 35.318874] RIP: 0033:0x7f51e5f8b0ab
> > [ 35.320395] Code: Unable to access opcode bytes at RIP 0x7f51e5f8b081.
> > [ 35.322985] RSP: 002b:00007f50dbdfd5c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> > [ 35.326015] RAX: fffffffffffffffc RBX: 000055df487dd0a0 RCX: 00007f51e5f8b0ab
> > [ 35.328914] RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 000000000000000e
> > [ 35.332162] RBP: 00007f50dbdfd6c0 R08: 000055df46521e60 R09: 00007ffcd47ed080
> > [ 35.335172] R10: 00007ffcd47ed090 R11: 0000000000000246 R12: 00007ffcd4653f2e
> > [ 35.338302] R13: 00007ffcd4653f2f R14: 0000000000000000 R15: 00007f50dbdff640
> > [ 35.341320] ---[ end trace fa01d10f9909874f ]---
> >
> >
> > Oh, well, I will now switch to vanilla L0 kernel, just in case, and see where to go from this point.
> >
> > Best regards,
> > Maxim Levitsky
> >

From 5abf99c76e76fa2f5c72c51db1443e7032423998 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <mlevitsk@redhat.com>
Date: Thu, 20 Jan 2022 18:00:07 +0200
Subject: [PATCH] Pause all VCPUs on host bridge memregion changes

This is temp hack to avoid cpu_pm=on failures
---
hw/pci-host/i440fx.c | 5 +++++
hw/pci-host/q35.c | 5 +++++
2 files changed, 10 insertions(+)

diff --git a/hw/pci-host/i440fx.c b/hw/pci-host/i440fx.c
index e08716142b..03384b410e 100644
--- a/hw/pci-host/i440fx.c
+++ b/hw/pci-host/i440fx.c
@@ -36,6 +36,7 @@
#include "qapi/visitor.h"
#include "qemu/error-report.h"
#include "qom/object.h"
+#include "sysemu/cpus.h"

/*
* I440FX chipset data sheet.
@@ -69,6 +70,8 @@ static void i440fx_update_memory_mappings(PCII440FXState *d)
int i;
PCIDevice *pd = PCI_DEVICE(d);

+ pause_all_vcpus();
+
memory_region_transaction_begin();
for (i = 0; i < ARRAY_SIZE(d->pam_regions); i++) {
pam_update(&d->pam_regions[i], i,
@@ -79,6 +82,8 @@ static void i440fx_update_memory_mappings(PCII440FXState *d)
memory_region_set_enabled(&d->smram,
pd->config[I440FX_SMRAM] & SMRAM_G_SMRAME);
memory_region_transaction_commit();
+
+ resume_all_vcpus();
}


diff --git a/hw/pci-host/q35.c b/hw/pci-host/q35.c
index ab5a47aff5..02831f5248 100644
--- a/hw/pci-host/q35.c
+++ b/hw/pci-host/q35.c
@@ -37,6 +37,7 @@
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/module.h"
+#include "sysemu/cpus.h"

/****************************************************************************
* Q35 host
@@ -471,6 +472,8 @@ static void mch_write_config(PCIDevice *d,
{
MCHPCIState *mch = MCH_PCI_DEVICE(d);

+ pause_all_vcpus();
+
pci_default_write_config(d, address, val, len);

if (ranges_overlap(address, len, MCH_HOST_BRIDGE_PAM0,
@@ -496,6 +499,8 @@ static void mch_write_config(PCIDevice *d,
if (ranges_overlap(address, len, MCH_HOST_BRIDGE_F_SMBASE, 1)) {
mch_update_smbase_smram(mch);
}
+
+ resume_all_vcpus();
}

static void mch_update(MCHPCIState *mch)
--
2.26.3
\
 
 \ /
  Last update: 2022-05-02 10:00    [W:0.051 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site