lkml.org 
[lkml]   [2022]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 5/5] pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt
Hi Biju,

Thank you for the review.

On Thu, May 12, 2022 at 6:35 AM Biju Das <biju.das.jz@bp.renesas.com> wrote:
>
> Hi Prabhakar,
>
> Thanks for the patch.
>
> > Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Subject: [PATCH v3 5/5] pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to
> > handle GPIO interrupt
> >
> > Add IRQ domian to RZ/G2L pinctrl driver to handle GPIO interrupt.
> >
> > GPIO0-GPIO122 pins can be used as IRQ lines but only 32 pins can be used as
> > IRQ lines at given time. Selection of pins as IRQ lines is handled by IA55
> > (which is the IRQC block) which sits in between the GPIO and GIC.
>
> Do we need to update bindings with interrupt-cells on [1] like [2] as it act as parent for GPIO interrupts?
>
Yes interrupt-controller and interrupt-parent needs to be added. I'm
wondering if "interrupt-cells" is not required. If the pin is an
interrupt it will be passed as an GPIO.

@Geert - your thoughts ?

Cheers,
Prabhakar

\
 
 \ /
  Last update: 2022-05-12 19:44    [W:0.118 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site