[lkml]   [2022]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
SubjectAw: Re: Re: Re: [PATCH] arm64: dts: rockchip: Fix clocks for rk356x usb

so to not break the binding and other boards the right Patch should be like this

+++ b/drivers/usb/dwc3/core.c
@@ -1691,17 +1691,17 @@ static int dwc3_probe(struct platform_device *pdev)
* Clocks are optional, but new DT platforms should support all
* clocks as required by the DT-binding.
- dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
+ dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
if (IS_ERR(dwc->bus_clk))
return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
"could not get bus clock\n");

- dwc->ref_clk = devm_clk_get_optional(dev, "ref");
+ dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
if (IS_ERR(dwc->ref_clk))
return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
"could not get ref clock\n");

- dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
+ dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
if (IS_ERR(dwc->susp_clk))
return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
"could not get suspend clock\n");
but this needs fixing dts using the new clock names

this is a link to the series moving from bulk_clk to named clocks:

regards Frank

 \ /
  Last update: 2022-04-09 13:58    [W:0.044 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site