lkml.org 
[lkml]   [2022]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC v2 35/39] usb: handle HAS_IOPORT dependencies
Date
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to guard sections of code calling them
as alternative access methods with CONFIG_HAS_IOPORT checks. Similarly
drivers requiring these functions need to depend on HAS_IOPORT.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
drivers/usb/core/hcd-pci.c | 2 +
drivers/usb/host/Kconfig | 4 +-
drivers/usb/host/pci-quirks.c | 128 ++++++++++++++++++----------------
drivers/usb/host/pci-quirks.h | 31 +++++---
drivers/usb/host/uhci-hcd.c | 2 +-
drivers/usb/host/uhci-hcd.h | 33 +++++----
6 files changed, 117 insertions(+), 83 deletions(-)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 8176bc81a635..4d119154acd0 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -212,8 +212,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id,
goto free_irq_vectors;
}

+#ifdef CONFIG_USB_PCI_AMD
hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+#endif

if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 57ca5f97a3dc..cd1faa3174e3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -369,7 +369,7 @@ config USB_ISP116X_HCD

config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
- depends on HAS_IOMEM
+ depends on HAS_IOPORT
depends on COMPILE_TEST # nothing uses this
help
Supports the Philips ISP1362 chip as a host controller
@@ -605,7 +605,7 @@ endif # USB_OHCI_HCD

config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
+ depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
help
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index ef08d68b9714..4fd06b48149d 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,23 @@
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */

+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG 0xF8
+#define ASMT_DATA_WRITE1_REG 0xFC
+#define ASMT_CONTROL_REG 0xE0
+#define ASMT_CONTROL_WRITE_BIT 0x02
+#define ASMT_WRITEREG_CMD 0x10423
+#define ASMT_FLOWCTL_ADDR 0xFA30
+#define ASMT_FLOWCTL_DATA 0xBA
+#define ASMT_PSEUDO_DATA 0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
+#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
+
+#ifdef CONFIG_USB_PCI_AMD
/* AMD quirk use */
#define AB_REG_BAR_LOW 0xe0
#define AB_REG_BAR_HIGH 0xe1
@@ -93,21 +110,6 @@
#define NB_PIF0_PWRDOWN_0 0x01100012
#define NB_PIF0_PWRDOWN_1 0x01100013

-#define USB_INTEL_XUSB2PR 0xD0
-#define USB_INTEL_USB2PRM 0xD4
-#define USB_INTEL_USB3_PSSEN 0xD8
-#define USB_INTEL_USB3PRM 0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG 0xF8
-#define ASMT_DATA_WRITE1_REG 0xFC
-#define ASMT_CONTROL_REG 0xE0
-#define ASMT_CONTROL_WRITE_BIT 0x02
-#define ASMT_WRITEREG_CMD 0x10423
-#define ASMT_FLOWCTL_ADDR 0xFA30
-#define ASMT_FLOWCTL_DATA 0xBA
-#define ASMT_PSEUDO_DATA 0
-
/*
* amd_chipset_gen values represent AMD different chipset generations
*/
@@ -460,50 +462,6 @@ void usb_amd_quirk_pll_disable(void)
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);

-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
- unsigned long retry_count;
- unsigned char value;
-
- for (retry_count = 1000; retry_count > 0; --retry_count) {
-
- pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
- if (value == 0xff) {
- dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
- return -EIO;
- }
-
- if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
- return 0;
-
- udelay(50);
- }
-
- dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
- return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send command and address to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send data to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
void usb_amd_quirk_pll_enable(void)
{
usb_amd_quirk_pll(0);
@@ -632,7 +590,53 @@ bool usb_amd_pt_check_port(struct device *device, int port)
return !(value & BIT(port_shift));
}
EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif
+
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+ unsigned long retry_count;
+ unsigned char value;
+
+ for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+ pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+ if (value == 0xff) {
+ dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+ return -EIO;
+ }
+
+ if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+ return 0;
+
+ udelay(50);
+ }
+
+ dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+ return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send command and address to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;

+ /* send data to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+#ifdef CONFIG_HAS_IOPORT
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
@@ -713,6 +717,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
return 1;
}
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+#endif

static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
{
@@ -725,6 +730,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)

static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
{
+#ifdef HAS_IOPORT
unsigned long base = 0;
int i;

@@ -739,6 +745,7 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)

if (base)
uhci_check_and_reset_hc(pdev, base);
+#endif
}

static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
@@ -1273,7 +1280,8 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev)
"Can't enable PCI device, BIOS handoff failed.\n");
return;
}
- if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
+ if (IS_ENABLED(CONFIG_USB_UHCI_HCD) &&
+ pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
quirk_usb_handoff_uhci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
quirk_usb_handoff_ohci(pdev);
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..5642318fd1d1 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,33 +2,48 @@
#ifndef __LINUX_USB_PCI_QUIRKS_H
#define __LINUX_USB_PCI_QUIRKS_H

-#ifdef CONFIG_USB_PCI
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
+
+#ifdef CONFIG_USB_PCI_AMD
bool usb_amd_hang_symptom_quirk(void);
bool usb_amd_prefetch_quirk(void);
void usb_amd_dev_put(void);
bool usb_amd_quirk_pll_check(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
void sb800_prefetch(struct device *dev, int on);
bool usb_amd_pt_check_port(struct device *device, int port);
#else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+ return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+ return false;
+}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+ return false;
+}
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
static inline void sb800_prefetch(struct device *dev, int on) {}
static inline bool usb_amd_pt_check_port(struct device *device, int port)
{
return false;
}
+#endif /* CONFIG_USB_PCI_AMD */
+
+#ifdef CONFIG_USB_PCI
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_USB_PCI */

#endif /* __LINUX_USB_PCI_QUIRKS_H */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d90b869f5f40..a3b0d3d3b395 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -841,7 +841,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)

static const char hcd_name[] = "uhci_hcd";

-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(CONFIG_HAS_IOPORT)
#include "uhci-pci.c"
#define PCI_DRIVER uhci_pci_driver
#endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 8ae5ccd26753..be4aee1f0ca5 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -505,36 +505,43 @@ static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
* we use memory mapped registers.
*/

+#ifdef CONFIG_HAS_IOPORT
+#define UHCI_IN(x) x
+#define UHCI_OUT(x) x
+#else
+#define UHCI_IN(x) 0
+#define UHCI_OUT(x)
+#endif
#ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
/* Support PCI only */
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
- return inl(uhci->io_addr + reg);
+ return UHCI_IN(inl(uhci->io_addr + reg));
}

static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
- outl(val, uhci->io_addr + reg);
+ UHCI_OUT(outl(val, uhci->io_addr + reg));
}

static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
- return inw(uhci->io_addr + reg);
+ return UHCI_IN(inw(uhci->io_addr + reg));
}

static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
- outw(val, uhci->io_addr + reg);
+ UHCI_OUT(outw(val, uhci->io_addr + reg));
}

static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
- return inb(uhci->io_addr + reg);
+ return UHCI_IN(inb(uhci->io_addr + reg));
}

static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
- outb(val, uhci->io_addr + reg);
+ UHCI_OUT(outb(val, uhci->io_addr + reg));
}

#else
@@ -587,7 +594,7 @@ static inline int uhci_aspeed_reg(unsigned int reg)
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inl(uhci->io_addr + reg);
+ return UHCI_IN(inl(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -601,7 +608,7 @@ static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outl(val, uhci->io_addr + reg);
+ UHCI_OUT(outl(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -615,7 +622,7 @@ static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inw(uhci->io_addr + reg);
+ return UHCI_IN(inw(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -629,7 +636,7 @@ static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outw(val, uhci->io_addr + reg);
+ UHCI_OUT(outw(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -643,7 +650,7 @@ static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inb(uhci->io_addr + reg);
+ return UHCI_IN(inb(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -657,7 +664,7 @@ static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outb(val, uhci->io_addr + reg);
+ UHCI_OUT(outb(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -668,6 +675,8 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
writeb(val, uhci->regs + reg);
}
#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+#undef UHCI_IN
+#undef UHCI_OUT

/*
* The GRLIB GRUSBHC controller can use big endian format for its descriptors.
--
2.32.0
\
 
 \ /
  Last update: 2022-04-29 15:57    [W:0.747 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site