[lkml]   [2022]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v2 3/5] scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabled
In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be
stable for at least 1us. Even though there is wmb() to make sure the write
gets "completed", there is no guarantee that the write actually reached
the UFS device. There is a good chance that the write could be stored in
a Write Buffer (WB). In that case, even though the CPU waits for 1us, the
ref_clk might not be stable for that period.

So lets do a readl() to make sure that the previous write has reached the
UFS device before udelay().

Also, the wmb() after writel_relaxed is not really needed. Both writel and
readl are ordered on all architectures and the CPU won't speculate
instructions after readl() due to the in-built control dependency with
read value on weakly ordered architectures. So it can be safely removed.

Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Manivannan Sadhasivam <>
drivers/scsi/ufs/ufs-qcom.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 6ee33cc0ad09..f47a16b7cff5 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -687,8 +687,11 @@ static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)

writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);

- /* ensure that ref_clk is enabled/disabled before we return */
- wmb();
+ /*
+ * Make sure the write to ref_clk reaches the destination and
+ * not stored in a Write Buffer (WB).
+ */
+ readl(host->dev_ref_clk_ctrl_mmio);

* If we call hibern8 exit after this, we need to make sure that
 \ /
  Last update: 2022-04-23 16:05    [W:0.056 / U:2.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site