[lkml]   [2022]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/4] Enable rk356x PCIe controller
This series enables the DesignWare based PCIe controller on the rk356x
series of chips.
We drop the fallback to the core driver due to compatibility issues.
We add support for legacy interrupts for cards that lack MSI support
(which is partially broken currently).
We then add the device tree nodes to enable PCIe on the Quartz64 Model

Patch 1 drops the snps,dw,pcie fallback from the dt-binding
Patch 2 adds legacy interrupt support to the driver
Patch 3 adds the device tree binding to the rk356x.dtsi
Patch 4 enables the PCIe controller on the Quartz64-A

- drop the ITS modification, poor compatibility is better than
completely broken

- drop select node from dt-binding
- convert to for_each_set_bit
- convert to generic_handle_domain_irq
- drop unncessary dev_err
- reorder irq_chip items
- change to level_irq
- install the handler after initializing the domain

- Fix PCIE_LEGACY_INT_ENABLE to only enable the RC interrupts
- Add legacy interrupt enable/disable support

Michael Riesch (1):
arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10

Peter Geis (3):
dt-bindings: pci: remove fallback from Rockchip DesignWare binding
PCI: dwc: rockchip: add legacy interrupt support
arm64: dts: rockchip: add rk3568 pcie2x1 controller

.../bindings/pci/rockchip-dw-pcie.yaml | 12 +-
.../boot/dts/rockchip/rk3568-evb1-v10.dts | 46 +++++++
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 55 +++++++++
drivers/pci/controller/dwc/pcie-dw-rockchip.c | 112 +++++++++++++++++-
4 files changed, 212 insertions(+), 13 deletions(-)


 \ /
  Last update: 2022-04-16 11:03    [W:0.026 / U:4.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site