lkml.org 
[lkml]   [2022]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v9 17/22] phy: phy-mtk-dp: Add driver for DP phy
On Mon, 28 Mar 2022 10:20, AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com> wrote:
>Il 28/03/22 00:39, Guillaume Ranquet ha scritto:
>> From: Markus Schneider-Pargmann <msp@baylibre.com>
>>
>> This is a new driver that supports the integrated DisplayPort phy for
>> mediatek SoCs, especially the mt8195. The phy is integrated into the
>> DisplayPort controller and will be created by the mtk-dp driver. This
>> driver expects a struct regmap to be able to work on the same registers
>> as the DisplayPort controller. It sets the device data to be the struct
>> phy so that the DisplayPort controller can easily work with it.
>>
>> The driver does not have any devicetree bindings because the datasheet
>> does not list the controller and the phy as distinct units.
>>
>> The interaction with the controller can be covered by the configure
>> callback of the phy framework and its displayport parameters.
>>
>> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
>> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
>> ---
>> MAINTAINERS | 1 +
>> drivers/phy/mediatek/Kconfig | 8 ++
>> drivers/phy/mediatek/Makefile | 1 +
>> drivers/phy/mediatek/phy-mtk-dp.c | 201 ++++++++++++++++++++++++++++++
>> 4 files changed, 211 insertions(+)
>> create mode 100644 drivers/phy/mediatek/phy-mtk-dp.c
>>
>
>..snip..
>
>> diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c
>> new file mode 100644
>> index 000000000000..e5c5494f3636
>> --- /dev/null
>> +++ b/drivers/phy/mediatek/phy-mtk-dp.c
>
>..snip..
>
>> +
>> +static int mtk_dp_phy_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct mtk_dp_phy *dp_phy;
>> + struct phy *phy;
>> + struct regmap *regs;
>> +
>> + regs = syscon_regmap_lookup_by_phandle(dev->of_node, "mediatek,dp-syscon");
>> +
>
>Please drop this blank line
>
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> +
>> + dp_phy = devm_kzalloc(dev, sizeof(*dp_phy), GFP_KERNEL);
>> + if (!dp_phy)
>> + return -ENOMEM;
>> +
>> + dp_phy->regs = regs;
>> +
>> + phy = devm_phy_create(dev, NULL, &mtk_dp_phy_dev_ops);
>> +
>
>Same here
>
>> + if (IS_ERR(phy))
>> + return dev_err_probe(dev, PTR_ERR(phy), "Failed to create DP PHY: %ld\n", PTR_ERR(phy));
>> +
>
>Using dev_err_probe automates printing the error, so the correct usage is:
>
>return dev_err_probe(dev, PTR_ERR(phy), "Failed to create DP PHY\n");
>
>> + phy_set_drvdata(phy, dp_phy);
>> +
>> + return 0;
>> +}
>> +
>> +struct platform_driver mtk_dp_phy_driver = {
>> + .probe = mtk_dp_phy_probe,
>> + .driver = {
>> + .name = "mediatek-dp-phy",
>> + },
>> +};
>> +module_platform_driver(mtk_dp_phy_driver);
>
>Also, in your dt-binding, you mention a compatible for this driver, but I don't see
>any, here. This means that you do know what to do, so please do it.
>

Following the comments from rob [1], I'll revert back to using
platform_device_register_data() from v8.

[1] https://lore.kernel.org/linux-mediatek/YkOPB5W7uXkOc72%2F@robh.at.kernel.org/

>Regards,
>Angelo
>
>> +
>> +MODULE_AUTHOR("Markus Schneider-Pargmann <msp@baylibre.com>");
>> +MODULE_DESCRIPTION("MediaTek DP PHY Driver");
>> +MODULE_LICENSE("GPL");
>

\
 
 \ /
  Last update: 2022-04-12 12:19    [W:0.058 / U:1.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site