[lkml]   [2022]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] ARM: dts: imx8mm-venice-gw{72xx,73xx}: fix OTG controller OC mode
On Fri, Apr 01, 2022 at 10:42:49AM -0700, Tim Harvey wrote:
> Both the GW72xx and GW73xx boards have USB1 routed to a USB OTG
> connector and USB2 routed to a USB hub.
> The OTG connector has over-current protection with an active-low
> pin and the USB1 to HUB connection has no over-current protection (as
> the HUB itself implements this for its downstream ports).
> Add proper dt nodes to specify the over-current pin polarity for USB1
> and disable over-current protection for USB2.
> Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
> Cc:
> Signed-off-by: Tim Harvey <>

Applied, thanks!

 \ /
  Last update: 2022-04-11 03:02    [W:0.031 / U:4.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site