lkml.org 
[lkml]   [2022]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] drm/gma500: depend on framebuffer
On Sun, Apr 10, 2022 at 9:40 PM James Hilliard
<james.hilliard1@gmail.com> wrote:
>
> On Sun, Apr 10, 2022 at 1:36 PM Patrik Jakobsson
> <patrik.r.jakobsson@gmail.com> wrote:
> >
> > On Sat, Apr 9, 2022 at 6:23 AM James Hilliard <james.hilliard1@gmail.com> wrote:
> > >
> > > Select the efi framebuffer if efi is enabled.
> > >
> > > This appears to be needed for video output to function correctly.
> > >
> > > Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
> >
> > Hi James,
> > EFI_FB is its own driver and not needed by gma500 to drive its
> > hardware. What makes you think it's required?
>
> I wasn't getting any HDMI video output without it enabled for some reason,
> I assume it is doing some sort of initialization needed by gma500
> during startup.

Then it sounds like you might just be using EFI_FB and not gma500. Can
you provide the kernel log with drm.debug=0x1f set on kernel
command-line.

What machine is this? I've seen very few gma500 devices with UEFI.

>
> >
> > -Patrik
> >
> > > ---
> > > Changes v2 -> v3:
> > > - select EFI_FB instead of depending on it
> > > Changes v1 -> v2:
> > > - use depends instead of select
> > > ---
> > > drivers/gpu/drm/gma500/Kconfig | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig
> > > index 0cff20265f97..a422fa84d53b 100644
> > > --- a/drivers/gpu/drm/gma500/Kconfig
> > > +++ b/drivers/gpu/drm/gma500/Kconfig
> > > @@ -2,11 +2,13 @@
> > > config DRM_GMA500
> > > tristate "Intel GMA500/600/3600/3650 KMS Framebuffer"
> > > depends on DRM && PCI && X86 && MMU
> > > + depends on FB
> > > select DRM_KMS_HELPER
> > > # GMA500 depends on ACPI_VIDEO when ACPI is enabled, just like i915
> > > select ACPI_VIDEO if ACPI
> > > select BACKLIGHT_CLASS_DEVICE if ACPI
> > > select INPUT if ACPI
> > > + select FB_EFI if EFI
> > > help
> > > Say yes for an experimental 2D KMS framebuffer driver for the
> > > Intel GMA500 (Poulsbo), Intel GMA600 (Moorestown/Oak Trail) and
> > > --
> > > 2.25.1
> > >

\
 
 \ /
  Last update: 2022-04-10 21:53    [W:0.046 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site