lkml.org 
[lkml]   [2022]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] input/i8042: Add TUXEDO/Clevo devices to i8042 quirk tables
Date
A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.

I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use. No negative effects could be
observed when setting all four.

The list is quite massive as neither the TUXEDO nor the Clevo dmi strings
have been very consistent historically. I tried to keep the list as short
as possible without risking on missing an affected device.

This is revision 3. The Clevo N150CU barebone is still removed as it might
have problems with the fix and needs further investigations. The
SchenkerTechnologiesGmbH System-/Board-Vendor string variations are
added. This is now based in the quirk table refactor. This now also
includes the additional noaux flag for the NS7xMU.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
---
drivers/input/serio/i8042-x86ia64io.h | 638 ++++++++++++++++++++++++++
1 file changed, 638 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index e41b0819277c..d9913e502ebf 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -978,6 +978,218 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* OQO Model 01 */
.matches = {
@@ -1023,6 +1235,219 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_NOLOOP)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them. This is for barebones that have the "Notebook" dmi
+ * String overwritten with "SchenkerTechnologiesGmbH".
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* Sharp Actius MM20 */
.matches = {
@@ -1095,6 +1520,219 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
},
.driver_data = (void *)(SERIO_QUIRK_NOMUX)
},
+ /*
+ * A lot of modern Clevo barebones have touchpad and/or keyboard issues
+ * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
+ * none of them have an external PS/2 port so this can savely be set for
+ * all of them. This is for barebones that have the "Notebook" dmi
+ * String overwritten with "TUXEDO".
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ /*
+ * At least one modern Clevo barebone has the touchpad connected both
+ * via PS/2 and i2c interface. This causes a race condition between the
+ * psmouse and i2c-hid driver. Since the full capability of the touchpad
+ * is available via the i2c interface and the device has no external
+ * PS/2 port, it is save to just ignore all ps2 mouses here to avoid
+ * this issue. The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of
+ * the different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
+ SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
+ SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
/* Mivvy M310 */
.matches = {
--
2.25.1
\
 
 \ /
  Last update: 2022-03-08 18:08    [W:0.607 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site