lkml.org 
[lkml]   [2022]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v8 1/2] dt-bindings: arm: Add OP-TEE transport for SCMI
From
Hell Etienne,

On 01.03.22 15:11, Etienne Carriere wrote:
> Hi sorry,
>
> I sent the mail while i was still typing it...
> Here is with the full answer.

Thanks for taking the time.

> On Tue, 1 Mar 2022 at 15:05, Etienne Carriere
> <etienne.carriere@linaro.org> wrote:
>>
>> Hello Ahmad,
>>
>> On Mon, 28 Feb 2022 at 17:01, Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>>>
>>> Hello Etienne,
>>>
>>> On 28.10.21 16:00, Etienne Carriere wrote:
>>>> Introduce compatible "linaro,scmi-optee" for SCMI transport channel
>>>> based on an OP-TEE service invocation. The compatible mandates a
>>>> channel ID defined with property "linaro,optee-channel-id".
>>>
>>> I just found this thread via the compatible in the STM32MP131 patch set:
>>> https://lore.kernel.org/all/20220225133137.813919-1-gabriel.fernandez@foss.st.com/
>>>
>>> Linux doesn't care whether PSCI is provided by TF-A, OP-TEE or something
>>> else, so there is just the arm,psci* compatible.
>>>
>>> What's different about SCMI that this is not possible? Why couldn't the
>>> existing binding and driver be used to communicate with OP-TEE as secure
>>> monitor as well?
>>
>> Compatible "linaro,scmi-optee" denote a alternate SCMI transport to
>> those already in v5.16.
>
> It is names scmi-optee because the interface exposed to access SCMI services is
> based on TEE's interface (UUID to open a session with and invoke commands).

I gathered as much, but I didn't understand why it had to be an extra transport
when SCMI over SMC already exists. Sudeep cleared this point up for me.

Cheers,
Ahmad

>
> The compatible is described in the Linux Documentation but not yet
> merged in the linux-next.
> It can be found in the tree of arm_scmi driver maintainers:
> https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git/log/?h=for-linux-next
>
> This commit:
> https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git/commit/?h=for-linux-next&id=b7d2cf7c817b86e705b97f72c6be192a6760a14f
>
> Br,
> Etienne
>
>>
>>
>>>
>>> Cheers,
>>> Ahmad
>>>
>>>>
>>>> Cc: devicetree@vger.kernel.org
>>>> Cc: Rob Herring <robh+dt@kernel.org>
>>>> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
>>>> ---
>>>> Changes since v6:
>>>> - Remove maxItems from linaro,optee-channel-id description
>>>>
>>>> No change since v5
>>>>
>>>> Changes since v4:
>>>> - Fix sram node name in DTS example: s/-shm-/-sram-/
>>>>
>>>> Changes since v3:
>>>> - Add description for linaro,optee-channel-id in patternProperties
>>>> specifying protocol can optionaly define a dedicated channel id.
>>>> - Fix DTS example (duplicated phandles issue, subnodes ordering)
>>>> - Fix typo in DTS example and description comments.
>>>>
>>>> Changes since v2:
>>>> - Define mandatory property linaro,optee-channel-id
>>>> - Rebased on yaml description file
>>>>
>>>> Changes since v1:
>>>> - Removed modification regarding mboxes property description.
>>>> ---
>>>> .../bindings/firmware/arm,scmi.yaml | 65 +++++++++++++++++++
>>>> 1 file changed, 65 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
>>>> index 5c4c6782e052..eae15df36eef 100644
>>>> --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
>>>> +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
>>>> @@ -38,6 +38,9 @@ properties:
>>>> The virtio transport only supports a single device.
>>>> items:
>>>> - const: arm,scmi-virtio
>>>> + - description: SCMI compliant firmware with OP-TEE transport
>>>> + items:
>>>> + - const: linaro,scmi-optee
>>>>
>>>> interrupts:
>>>> description:
>>>> @@ -83,6 +86,11 @@ properties:
>>>> description:
>>>> SMC id required when using smc or hvc transports
>>>>
>>>> + linaro,optee-channel-id:
>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>> + description:
>>>> + Channel specifier required when using OP-TEE transport.
>>>> +
>>>> protocol@11:
>>>> type: object
>>>> properties:
>>>> @@ -195,6 +203,12 @@ patternProperties:
>>>> minItems: 1
>>>> maxItems: 2
>>>>
>>>> + linaro,optee-channel-id:
>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>> + description:
>>>> + Channel specifier required when using OP-TEE transport and
>>>> + protocol has a dedicated communication channel.
>>>> +
>>>> required:
>>>> - reg
>>>>
>>>> @@ -226,6 +240,16 @@ else:
>>>> - arm,smc-id
>>>> - shmem
>>>>
>>>> + else:
>>>> + if:
>>>> + properties:
>>>> + compatible:
>>>> + contains:
>>>> + const: linaro,scmi-optee
>>>> + then:
>>>> + required:
>>>> + - linaro,optee-channel-id
>>>> +
>>>> examples:
>>>> - |
>>>> firmware {
>>>> @@ -340,7 +364,48 @@ examples:
>>>> reg = <0x11>;
>>>> #power-domain-cells = <1>;
>>>> };
>>>> + };
>>>> + };
>>>> +
>>>> + - |
>>>> + firmware {
>>>> + scmi {
>>>> + compatible = "linaro,scmi-optee";
>>>> + linaro,optee-channel-id = <0>;
>>>> +
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + scmi_dvfs1: protocol@13 {
>>>> + reg = <0x13>;
>>>> + linaro,optee-channel-id = <1>;
>>>> + shmem = <&cpu_optee_lpri0>;
>>>> + #clock-cells = <1>;
>>>> + };
>>>> +
>>>> + scmi_clk0: protocol@14 {
>>>> + reg = <0x14>;
>>>> + #clock-cells = <1>;
>>>> + };
>>>> + };
>>>> + };
>>>>
>>>> + soc {
>>>> + #address-cells = <2>;
>>>> + #size-cells = <2>;
>>>> +
>>>> + sram@51000000 {
>>>> + compatible = "mmio-sram";
>>>> + reg = <0x0 0x51000000 0x0 0x10000>;
>>>> +
>>>> + #address-cells = <1>;
>>>> + #size-cells = <1>;
>>>> + ranges = <0 0x0 0x51000000 0x10000>;
>>>> +
>>>> + cpu_optee_lpri0: optee-sram-section@0 {
>>>> + compatible = "arm,scmi-shmem";
>>>> + reg = <0x0 0x80>;
>>>> + };
>>>> };
>>>> };
>>>>
>>>
>>>
>>> --
>>> Pengutronix e.K. | |
>>> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
>>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
>>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>


--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2022-03-08 10:54    [W:0.055 / U:0.956 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site