lkml.org 
[lkml]   [2022]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] drm/panel : innolux-ej030na and abt-y030xx067a : add .enable and .disable
Date
Following the introduction of bridge_atomic_enable in the ingenic
drm driver, the crtc is enabled between .prepare and .enable, if
it exists.

Add it so the backlight is only enabled after the crtc is, to avoid
graphical issues.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
drivers/gpu/drm/panel/panel-abt-y030xx067a.c | 23 ++++++++++++--
drivers/gpu/drm/panel/panel-innolux-ej030na.c | 31 ++++++++++++++++---
2 files changed, 48 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
index f043b484055b..b5736344e3ec 100644
--- a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
+++ b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
@@ -183,8 +183,6 @@ static int y030xx067a_prepare(struct drm_panel *panel)
goto err_disable_regulator;
}

- msleep(120);
-
return 0;

err_disable_regulator:
@@ -202,6 +200,25 @@ static int y030xx067a_unprepare(struct drm_panel *panel)
return 0;
}

+static int y030xx067a_enable(struct drm_panel *panel)
+{
+ if (panel->backlight) {
+ /* Wait for the picture to be ready before enabling backlight */
+ msleep(120);
+ }
+
+ return 0;
+}
+
+static int y030xx067a_disable(struct drm_panel *panel)
+{
+ struct y030xx067a *priv = to_y030xx067a(panel);
+
+ regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE);
+
+ return 0;
+}
+
static int y030xx067a_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
@@ -239,6 +256,8 @@ static int y030xx067a_get_modes(struct drm_panel *panel,
static const struct drm_panel_funcs y030xx067a_funcs = {
.prepare = y030xx067a_prepare,
.unprepare = y030xx067a_unprepare,
+ .enable = y030xx067a_enable,
+ .disable = y030xx067a_disable,
.get_modes = y030xx067a_get_modes,
};

diff --git a/drivers/gpu/drm/panel/panel-innolux-ej030na.c b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
index c558de3f99be..6de7370185cd 100644
--- a/drivers/gpu/drm/panel/panel-innolux-ej030na.c
+++ b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
@@ -80,8 +80,6 @@ static const struct reg_sequence ej030na_init_sequence[] = {
{ 0x47, 0x08 },
{ 0x48, 0x0f },
{ 0x49, 0x0f },
-
- { 0x2b, 0x01 },
};

static int ej030na_prepare(struct drm_panel *panel)
@@ -109,8 +107,6 @@ static int ej030na_prepare(struct drm_panel *panel)
goto err_disable_regulator;
}

- msleep(120);
-
return 0;

err_disable_regulator:
@@ -128,6 +124,31 @@ static int ej030na_unprepare(struct drm_panel *panel)
return 0;
}

+static int ej030na_enable(struct drm_panel *panel)
+{
+ struct ej030na *priv = to_ej030na(panel);
+
+ /* standby off */
+ regmap_write(priv->map, 0x2b, 0x01);
+
+ if (panel->backlight) {
+ /* Wait for the picture to be ready before enabling backlight */
+ msleep(120);
+ }
+
+ return 0;
+}
+
+static int ej030na_disable(struct drm_panel *panel)
+{
+ struct ej030na *priv = to_ej030na(panel);
+
+ /* standby on */
+ regmap_write(priv->map, 0x2b, 0x00);
+
+ return 0;
+}
+
static int ej030na_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
@@ -165,6 +186,8 @@ static int ej030na_get_modes(struct drm_panel *panel,
static const struct drm_panel_funcs ej030na_funcs = {
.prepare = ej030na_prepare,
.unprepare = ej030na_unprepare,
+ .enable = ej030na_enable,
+ .disable = ej030na_disable,
.get_modes = ej030na_get_modes,
};

--
2.34.1
\
 
 \ /
  Last update: 2022-09-17 16:16    [W:0.096 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site