lkml.org 
[lkml]   [2022]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 243/262] net: stmmac: perserve TX and RX coalesce value during XDP setup
Date
From: Ong Boon Leong <boon.leong.ong@intel.com>

commit 61da6ac715700bcfeef50d187e15c6cc7c9d079b upstream.

When XDP program is loaded, it is desirable that the previous TX and RX
coalesce values are not re-inited to its default value. This prevents
unnecessary re-configurig the coalesce values that were working fine
before.

Fixes: ac746c8520d9 ("net: stmmac: enhance XDP ZC driver level switching performance")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20211124114019.3949125-1-boon.leong.ong@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6579,6 +6579,9 @@ int stmmac_xdp_open(struct net_device *d
tx_q->tx_tail_addr = tx_q->dma_tx_phy;
stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
tx_q->tx_tail_addr, chan);
+
+ hrtimer_init(&tx_q->txtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ tx_q->txtimer.function = stmmac_tx_timer;
}

/* Enable the MAC Rx/Tx */
@@ -6587,8 +6590,6 @@ int stmmac_xdp_open(struct net_device *d
/* Start Rx & Tx DMA Channels */
stmmac_start_all_dma(priv);

- stmmac_init_coalesce(priv);
-
ret = stmmac_request_irq(dev);
if (ret)
goto irq_error;

\
 
 \ /
  Last update: 2022-03-07 11:17    [W:2.438 / U:1.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site