lkml.org 
[lkml]   [2022]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] arm: dts: integrator: Update spi node properties
Date
SPI clock name for pl022 is "sspclk" and not "spiclk".
Fix below dtc warning:
clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk']

Also, update node name to spi instead of ssp to enable spi bindings
check.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
arch/arm/boot/dts/integratorap-im-pd1.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
index d47bfb66d069..ebe938556645 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -178,12 +178,12 @@ uart@200000 {
clock-names = "uartclk", "apb_pclk";
};

- ssp@300000 {
+ ssp0: spi@300000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00300000 0x1000>;
interrupts-extended = <&impd1_vic 3>;
clocks = <&impd1_sspclk>, <&sysclk>;
- clock-names = "spiclk", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
};

impd1_gpio0: gpio@400000 {
--
2.25.1
\
 
 \ /
  Last update: 2022-03-07 21:57    [W:0.054 / U:3.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site