lkml.org 
[lkml]   [2022]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH v3 4/4] remoteproc: virtio: Create platform device for the remoteproc_virtio
From
Hello Mathieu,

On 3/4/22 19:53, Mathieu Poirier wrote:
> On Wed, Jan 26, 2022 at 05:24:05PM +0100, Arnaud Pouliquen wrote:
>> Define a platform driver to manage the remoteproc virtio device as
>> a platform devices.
>>
>> The platform device allows to pass rproc_vdev_data platform data to
>> specify properties that are stored in the rproc_vdev structure.
>>
>> Such approach will allow to preserve legacy remoteproc virtio device
>> creation but also to probe the device using device tree mechanism.
>>
>> remoteproc_virtio.c update:
>> - Add rproc_virtio_driver platform driver. The probe/remove ops replace
>> the rproc_rvdev_add_device/rproc_rvdev_remove_device functions.
>> - All reference to the rvdev->dev has been updated to rvdev-pdev->dev.
>> - rproc_rvdev_release is removed as associated to the rvdev device.
>> - The use of rvdev->kref counter is replaced by get/put_device on the
>> remoteproc virtio platform device.
>> - The vdev device no longer increments rproc device counter.
>> increment/decrement is done in rproc_virtio_probe/rproc_virtio_remove
>> function in charge of the vrings allocation/free.
>>
>> remoteproc_core.c update:
>> Migrate from the rvdev device to the rvdev platform device.
>> From this patch, when a vdev resource is found in the resource table
>> the remoteproc core register a platform device.
>>
>> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
>> ---
>> Update vs previous revision:
>> - squash following two patches
>> - [4/6] remoteproc: virtio: Create platform device for the remoteproc_virtio
>> https://lkml.org/lkml/2021/12/22/112
>> - [6/6] remoteproc: Instantiate the new remoteproc virtio platform device
>> https://lkml.org/lkml/2021/12/22/114
>> ---
>> drivers/remoteproc/remoteproc_core.c | 23 +++-
>> drivers/remoteproc/remoteproc_internal.h | 3 -
>> drivers/remoteproc/remoteproc_virtio.c | 151 +++++++++++------------
>> include/linux/remoteproc.h | 6 +-
>> 4 files changed, 93 insertions(+), 90 deletions(-)
>>
>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
>> index eb6b43b71c2b..5b864c9c6244 100644
>> --- a/drivers/remoteproc/remoteproc_core.c
>> +++ b/drivers/remoteproc/remoteproc_core.c
>> @@ -467,6 +467,7 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
>> struct device *dev = &rproc->dev;
>> struct rproc_vdev *rvdev;
>> struct rproc_vdev_data rvdev_data;
>> + struct platform_device *pdev;
>>
>> /* make sure resource isn't truncated */
>> if (struct_size(rsc, vring, rsc->num_of_vrings) + rsc->config_len >
>> @@ -495,9 +496,23 @@ static int rproc_handle_vdev(struct rproc *rproc, void *ptr,
>> rvdev_data.rsc_offset = offset;
>> rvdev_data.rsc = rsc;
>>
>> - rvdev = rproc_rvdev_add_device(rproc, &rvdev_data);
>> - if (IS_ERR(rvdev))
>> - return PTR_ERR(rvdev);
>> + pdev = platform_device_register_data(dev, "rproc-virtio", rvdev_data.index, &rvdev_data,
>> + sizeof(rvdev_data));
>> + if (IS_ERR(pdev)) {
>> + dev_err(rproc->dev.parent,
>> + "failed to create rproc-virtio device\n");
>> + return PTR_ERR(pdev);
>> + }
>> +
>> + /*
>> + * At this point the registered remoteproc virtio platform device should have been probed.
>> + * Get the associated rproc_vdev struct to assign the vrings.
>> + */
>> + rvdev = platform_get_drvdata(pdev);
>> + if (!rvdev) {
>> + platform_device_unregister(pdev);
>> + return -EINVAL;
>> + }
>
> I can't find a reason to justify this check... Any error condition should be
> handled in rproc_virtio_probe() and reported by IS_ERR(pdev) above.
>
> Otherwise this patchset is holding together.

Thanks for the review!
I plan to send this week or next week a new version integrating all your comments.

Regards,
Arnaud

> Thanks,
> Mathieu
>
>>
>> return 0;
>> }
>> @@ -1237,7 +1252,7 @@ void rproc_resource_cleanup(struct rproc *rproc)
>>
>> /* clean up remote vdev entries */
>> list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node)
>> - kref_put(&rvdev->refcount, rproc_vdev_release);
>> + platform_device_unregister(rvdev->pdev);
>>
>> rproc_coredump_cleanup(rproc);
>> }
>> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
>> index 7725b404afc6..175e64a1f3a1 100644
>> --- a/drivers/remoteproc/remoteproc_internal.h
>> +++ b/drivers/remoteproc/remoteproc_internal.h
>> @@ -45,10 +45,7 @@ int rproc_of_parse_firmware(struct device *dev, int index,
>> const char **fw_name);
>>
>> /* from remoteproc_virtio.c */
>> -struct rproc_vdev *rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data);
>> -void rproc_rvdev_remove_device(struct rproc_vdev *rvdev);
>> irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id);
>> -void rproc_vdev_release(struct kref *ref);
>>
>> /* from remoteproc_debugfs.c */
>> void rproc_remove_trace_file(struct dentry *tfile);
>> diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c
>> index 1c4fd79ac1c5..de9f12fcd044 100644
>> --- a/drivers/remoteproc/remoteproc_virtio.c
>> +++ b/drivers/remoteproc/remoteproc_virtio.c
>> @@ -13,6 +13,7 @@
>> #include <linux/dma-map-ops.h>
>> #include <linux/dma-mapping.h>
>> #include <linux/export.h>
>> +#include <linux/of_platform.h>
>> #include <linux/of_reserved_mem.h>
>> #include <linux/remoteproc.h>
>> #include <linux/virtio.h>
>> @@ -46,7 +47,11 @@ static int copy_dma_range_map(struct device *to, struct device *from)
>>
>> static struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
>> {
>> - return container_of(vdev->dev.parent, struct rproc_vdev, dev);
>> + struct platform_device *pdev;
>> +
>> + pdev = container_of(vdev->dev.parent, struct platform_device, dev);
>> +
>> + return platform_get_drvdata(pdev);
>> }
>>
>> static struct rproc *vdev_to_rproc(struct virtio_device *vdev)
>> @@ -341,13 +346,10 @@ static void rproc_virtio_dev_release(struct device *dev)
>> {
>> struct virtio_device *vdev = dev_to_virtio(dev);
>> struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
>> - struct rproc *rproc = vdev_to_rproc(vdev);
>>
>> kfree(vdev);
>>
>> - kref_put(&rvdev->refcount, rproc_vdev_release);
>> -
>> - put_device(&rproc->dev);
>> + put_device(&rvdev->pdev->dev);
>> }
>>
>> /**
>> @@ -363,7 +365,7 @@ static void rproc_virtio_dev_release(struct device *dev)
>> static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
>> {
>> struct rproc *rproc = rvdev->rproc;
>> - struct device *dev = &rvdev->dev;
>> + struct device *dev = &rvdev->pdev->dev;
>> struct virtio_device *vdev;
>> struct rproc_mem_entry *mem;
>> int ret;
>> @@ -433,18 +435,8 @@ static int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id)
>> vdev->dev.parent = dev;
>> vdev->dev.release = rproc_virtio_dev_release;
>>
>> - /*
>> - * We're indirectly making a non-temporary copy of the rproc pointer
>> - * here, because drivers probed with this vdev will indirectly
>> - * access the wrapping rproc.
>> - *
>> - * Therefore we must increment the rproc refcount here, and decrement
>> - * it _only_ when the vdev is released.
>> - */
>> - get_device(&rproc->dev);
>> -
>> /* Reference the vdev and vring allocations */
>> - kref_get(&rvdev->refcount);
>> + get_device(dev);
>>
>> ret = register_virtio_device(vdev);
>> if (ret) {
>> @@ -486,78 +478,57 @@ static int rproc_vdev_do_start(struct rproc_subdev *subdev)
>> static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed)
>> {
>> struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev);
>> + struct device *dev = &rvdev->pdev->dev;
>> int ret;
>>
>> - ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev);
>> + ret = device_for_each_child(dev, NULL, rproc_remove_virtio_dev);
>> if (ret)
>> - dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret);
>> -}
>> -
>> -/**
>> - * rproc_rvdev_release() - release the existence of a rvdev
>> - *
>> - * @dev: the subdevice's dev
>> - */
>> -static void rproc_rvdev_release(struct device *dev)
>> -{
>> - struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev);
>> -
>> - of_reserved_mem_device_release(dev);
>> -
>> - kfree(rvdev);
>> + dev_warn(dev, "can't remove vdev child device: %d\n", ret);
>> }
>>
>> -struct rproc_vdev *
>> -rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
>> +static int rproc_virtio_probe(struct platform_device *pdev)
>> {
>> + struct device *dev = &pdev->dev;
>> + struct rproc_vdev_data *rvdev_data = dev->platform_data;
>> struct rproc_vdev *rvdev;
>> - struct fw_rsc_vdev *rsc = rvdev_data->rsc;
>> - char name[16];
>> + struct rproc *rproc = container_of(dev->parent, struct rproc, dev);
>> + struct fw_rsc_vdev *rsc;
>> int i, ret;
>>
>> - rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL);
>> - if (!rvdev)
>> - return ERR_PTR(-ENOMEM);
>> + if (!rvdev_data)
>> + return -EINVAL;
>>
>> - kref_init(&rvdev->refcount);
>> + rvdev = devm_kzalloc(dev, sizeof(*rvdev), GFP_KERNEL);
>> + if (!rvdev)
>> + return -ENOMEM;
>>
>> rvdev->id = rvdev_data->id;
>> rvdev->rproc = rproc;
>> rvdev->index = rvdev_data->index;
>>
>> - /* Initialise vdev subdevice */
>> - snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index);
>> - rvdev->dev.parent = &rproc->dev;
>> - rvdev->dev.release = rproc_rvdev_release;
>> - dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name);
>> - dev_set_drvdata(&rvdev->dev, rvdev);
>> -
>> - ret = device_register(&rvdev->dev);
>> - if (ret) {
>> - put_device(&rvdev->dev);
>> - return ERR_PTR(ret);
>> - }
>> -
>> - ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent);
>> + ret = copy_dma_range_map(dev, rproc->dev.parent);
>> if (ret)
>> - goto free_rvdev;
>> + return ret;
>>
>> /* Make device dma capable by inheriting from parent's capabilities */
>> - set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent));
>> + set_dma_ops(dev, get_dma_ops(rproc->dev.parent));
>>
>> - ret = dma_coerce_mask_and_coherent(&rvdev->dev,
>> - dma_get_mask(rproc->dev.parent));
>> + ret = dma_coerce_mask_and_coherent(dev, dma_get_mask(rproc->dev.parent));
>> if (ret) {
>> - dev_warn(&rvdev->dev,
>> - "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
>> + dev_warn(dev, "Failed to set DMA mask %llx. Trying to continue... (%pe)\n",
>> dma_get_mask(rproc->dev.parent), ERR_PTR(ret));
>> }
>>
>> + platform_set_drvdata(pdev, rvdev);
>> + rvdev->pdev = pdev;
>> +
>> + rsc = rvdev_data->rsc;
>> +
>> /* parse the vrings */
>> for (i = 0; i < rsc->num_of_vrings; i++) {
>> ret = rproc_parse_vring(rvdev, rsc, i);
>> if (ret)
>> - goto free_rvdev;
>> + return ret;
>> }
>>
>> /* remember the resource offset*/
>> @@ -577,18 +548,30 @@ rproc_rvdev_add_device(struct rproc *rproc, struct rproc_vdev_data *rvdev_data)
>>
>> rproc_add_subdev(rproc, &rvdev->subdev);
>>
>> - return rvdev;
>> + dev_dbg(dev, "virtio dev %d added\n", rvdev->index);
>> +
>> + /*
>> + * We're indirectly making a non-temporary copy of the rproc pointer
>> + * here, because the platform devicer or the vdev device will indirectly
>> + * access the wrapping rproc.
>> + *
>> + * Therefore we must increment the rproc refcount here, and decrement
>> + * it _only_ on platform remove.
>> + */
>> + get_device(&rproc->dev);
>> +
>> + return 0;
>>
>> unwind_vring_allocations:
>> for (i--; i >= 0; i--)
>> rproc_free_vring(&rvdev->vring[i]);
>> -free_rvdev:
>> - device_unregister(&rvdev->dev);
>> - return ERR_PTR(ret);
>> +
>> + return ret;
>> }
>>
>> -void rproc_rvdev_remove_device(struct rproc_vdev *rvdev)
>> +static int rproc_virtio_remove(struct platform_device *pdev)
>> {
>> + struct rproc_vdev *rvdev = dev_get_drvdata(&pdev->dev);
>> struct rproc *rproc = rvdev->rproc;
>> struct rproc_vring *rvring;
>> int id;
>> @@ -600,19 +583,29 @@ void rproc_rvdev_remove_device(struct rproc_vdev *rvdev)
>>
>> rproc_remove_subdev(rproc, &rvdev->subdev);
>> rproc_unregister_rvdev(rvdev);
>> - device_unregister(&rvdev->dev);
>> -}
>>
>> -void rproc_vdev_release(struct kref *ref)
>> -{
>> - struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount);
>> - struct rproc_vring *rvring;
>> - int id;
>> + of_reserved_mem_device_release(&pdev->dev);
>>
>> - for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) {
>> - rvring = &rvdev->vring[id];
>> - rproc_free_vring(rvring);
>> - }
>> + dev_dbg(&pdev->dev, "virtio dev %d removed\n", rvdev->index);
>>
>> - rproc_rvdev_remove_device(rvdev);
>> + /* The remote proc device can be removed */
>> + put_device(&rproc->dev);
>> +
>> + return 0;
>> }
>> +
>> +/* Platform driver */
>> +static const struct of_device_id rproc_virtio_match[] = {
>> + { .compatible = "rproc-virtio", },
>> + {},
>> +};
>> +
>> +static struct platform_driver rproc_virtio_driver = {
>> + .probe = rproc_virtio_probe,
>> + .remove = rproc_virtio_remove,
>> + .driver = {
>> + .name = "rproc-virtio",
>> + .of_match_table = rproc_virtio_match,
>> + },
>> +};
>> +builtin_platform_driver(rproc_virtio_driver);
>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>> index e0600e1e5c17..7951a3e2b62a 100644
>> --- a/include/linux/remoteproc.h
>> +++ b/include/linux/remoteproc.h
>> @@ -614,9 +614,8 @@ struct rproc_vring {
>>
>> /**
>> * struct rproc_vdev - remoteproc state for a supported virtio device
>> - * @refcount: reference counter for the vdev and vring allocations
>> * @subdev: handle for registering the vdev as a rproc subdevice
>> - * @dev: device struct used for reference count semantics
>> + * @pdev: remoteproc virtio platform device
>> * @id: virtio device id (as in virtio_ids.h)
>> * @node: list node
>> * @rproc: the rproc handle
>> @@ -625,10 +624,9 @@ struct rproc_vring {
>> * @index: vdev position versus other vdev declared in resource table
>> */
>> struct rproc_vdev {
>> - struct kref refcount;
>>
>> struct rproc_subdev subdev;
>> - struct device dev;
>> + struct platform_device *pdev;
>>
>> unsigned int id;
>> struct list_head node;
>> --
>> 2.25.1
>>

\
 
 \ /
  Last update: 2022-03-07 09:44    [W:0.087 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site