lkml.org 
[lkml]   [2022]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v4 3/3] iio: temperature: ltc2983: Make use of device properties
Date


> From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Sent: Friday, March 4, 2022 7:03 PM
> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>; linux-
> iio@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: Sa, Nuno <Nuno.Sa@analog.com>; Jonathan Cameron
> <jic23@kernel.org>; Lars-Peter Clausen <lars@metafoo.de>
> Subject: [PATCH v4 3/3] iio: temperature: ltc2983: Make use of device
> properties
>
> [External]
>
> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
>
> The conversion slightly changes the logic behind property reading for
> the configuration values. Original code allocates just as much memory
> as needed. Then for each separate 32- or 64-bit value it reads it from
> the property and converts to a raw one which will be fed to the sensor.
> In the new code we allocate the amount of memory needed to
> retrieve all
> values at once from the property and then convert them as required.
>
> Signed-off-by: Andy Shevchenko
> <andriy.shevchenko@linux.intel.com>
> Tested-by: Nuno Sá <nuno.sa@analog.com>
> ---

Even though I had a small note on this particular patch, consider:

Reviewed-by: Nuno Sá <nuno.sa@analog.com>

for the whole series...

- Nuno Sá

\
 
 \ /
  Last update: 2022-03-07 17:20    [W:0.653 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site