lkml.org 
[lkml]   [2022]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [BUG] crypto: ccree: driver does not handle case where cryptlen = authsize =0
On Mon, Mar 7, 2022 at 3:03 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2022-03-07 12:47, Gilad Ben-Yossef wrote:
> > On Mon, Mar 7, 2022 at 2:36 PM Robin Murphy <robin.murphy@arm.com> wrote:
> >>
> >> On 2022-03-07 12:17, Gilad Ben-Yossef wrote:
> >>> On Mon, Mar 7, 2022 at 1:14 PM Robin Murphy <robin.murphy@arm.com> wrote:
> >>>
> >>>> The "overlap" is in the sense of having more than one mapping within the
> >>>> same cacheline:
> >>>>
> >>>> [ 142.458120] DMA-API: add_dma_entry start P=ba79f200 N=ba79f
> >>>> D=ba79f200 L=10 DMA_FROM_DEVICE attrs=0
> >>>> [ 142.458156] DMA-API: add_dma_entry start P=445dc010 N=445dc
> >>>> D=445dc010 L=10 DMA_TO_DEVICE attrs=0
> >>>> [ 142.458178] sun8i-ss 1c15000.crypto: SRC 0/1/1 445dc000 len=16 bi=0
> >>>> [ 142.458215] sun8i-ss 1c15000.crypto: DST 0/1/1 ba79f200 len=16 bi=0
> >>>> [ 142.458234] DMA-API: add_dma_entry start P=ba79f210 N=ba79f
> >>>> D=ba79f210 L=10 DMA_FROM_DEVICE attrs=0
> >>>>
> >>>> This actually illustrates exactly the reason why this is unsupportable.
> >>>> ba79f200 is mapped for DMA_FROM_DEVICE, therefore subsequently mapping
> >>>> ba79f210 for DMA_TO_DEVICE may cause the cacheline covering the range
> >>>> ba79f200-ba79f23f to be written back over the top of data that the
> >>>> device has already started to write to memory. Hello data corruption.
> >>>>
> >>>> Separate DMA mappings should be from separate memory allocations,
> >>>> respecting ARCH_DMA_MINALIGN.
> >>>
> >>> hmm... I know I'm missing something here, but how does this align with
> >>> the following from active_cacheline_insert() in kernel/dma/debug.c ?
> >>>
> >>> /* If the device is not writing memory then we don't have any
> >>> * concerns about the cpu consuming stale data. This mitigates
> >>> * legitimate usages of overlapping mappings.
> >>> */
> >>> if (entry->direction == DMA_TO_DEVICE)
> >>> return 0;
> >>
> >> It's OK to have multiple mappings that are *all* DMA_TO_DEVICE, which
> >> looks to be the case that this check was intended to allow. However I
> >> think you're right that it should still actually check for conflicting
> >> directions between the new entry and any existing ones, otherwise it
> >> ends up a bit too lenient.
> >>
> >> Cheers,
> >> Robin.
> >
> > I understand what you are saying about why checking for conflicting
> > directions may be a good thing, but given that the code is as it is
> > right now, how are we seeing the warning for two mapping that one of
> > them is DMA_TO_DEVICE?
>
> Because it's the second one that isn't. The warning is triggered by
> adding the DMA_FROM_DEVICE entry, which *is* checked, and finds the
> DMA_TO_DEVICE entry already present. What's not great is that if those
> two mappings happened to be made in the opposite order then it would be
> missed entirely.

Please accept my sincere apologies if I'm being daft , but here is the
code for add_dma_entry():

static void add_dma_entry(struct dma_debug_entry *entry, unsigned long attrs)
{
struct hash_bucket *bucket;
unsigned long flags;
int rc;

bucket = get_hash_bucket(entry, &flags);
hash_bucket_add(bucket, entry);
put_hash_bucket(bucket, flags);

rc = active_cacheline_insert(entry);
if (rc == -ENOMEM) {
pr_err("cacheline tracking ENOMEM, dma-debug disabled\n");
global_disable = true;
} else if (rc == -EEXIST && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
err_printk(entry->dev, entry,
"cacheline tracking EEXIST, overlapping
mappings aren't supported\n");
}
}

Clearly we get to active_cacheline_insert() unconditionally.

Here is the code of active_cacheline_insert():

static int active_cacheline_insert(struct dma_debug_entry *entry)
{
phys_addr_t cln = to_cacheline_number(entry);
unsigned long flags;
int rc;

/* If the device is not writing memory then we don't have any
* concerns about the cpu consuming stale data. This mitigates
* legitimate usages of overlapping mappings.
*/
if (entry->direction == DMA_TO_DEVICE)
return 0;

spin_lock_irqsave(&radix_lock, flags);
rc = radix_tree_insert(&dma_active_cacheline, cln, entry);
if (rc == -EEXIST)
active_cacheline_inc_overlap(cln);
spin_unlock_irqrestore(&radix_lock, flags);

return rc;
}

Clearly the check for direction happens BEFORE we ever attempt to add
the cacheline tracking data.

So it shouldn't matter at all which is first and which is second... :-(

I know I'm missing something. But what?

Thanks,
Gilad

--
Gilad Ben-Yossef
Chief Coffee Drinker

values of β will give rise to dom!

\
 
 \ /
  Last update: 2022-03-07 14:14    [W:0.527 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site