lkml.org 
[lkml]   [2022]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 04/13] media: atmel: atmel-isc: implement media controller
Date
Implement the support for media-controller.
This means that the capabilities of the driver have changed and now
it also advertises the IO_MC .
The driver will register its media device, and add the video entity to this
media device. The subdevices are registered to the same media device.
The ISC will have a base entity which is auto-detected as atmel_isc_base.
It will also register a subdevice that allows cropping of the incoming frame
to the maximum frame size supported by the ISC.
The ISC will create a link between the subdevice that is asynchronously
registered and the atmel_isc_scaler entity.
Then, the atmel_isc_scaler and atmel_isc_base are connected through another
link.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Changes in v7:
- use maximum isc frame size as bounds always

Changes in v6:
- reworked a bit as suggested by Jacopo
- add try crops

Changes in v5:
- reworked s_fmt to pass the same format from sink to source
- simplified enum_mbus_code
- separated tgt and bounds to report correctly in g_sel

Changes in v4:
As suggested by Jacopo:
- renamed atmel_isc_mc to atmel_isc_scaler.c
- moved init_mc/clean_mc to isc_base file

Changes in v2:
- implement try formats


drivers/media/platform/atmel/Makefile | 2 +-
drivers/media/platform/atmel/atmel-isc-base.c | 75 ++++-
.../media/platform/atmel/atmel-isc-scaler.c | 271 ++++++++++++++++++
drivers/media/platform/atmel/atmel-isc.h | 37 +++
.../media/platform/atmel/atmel-sama5d2-isc.c | 14 +-
.../media/platform/atmel/atmel-sama7g5-isc.c | 12 +-
6 files changed, 403 insertions(+), 8 deletions(-)
create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c

diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
index 794e8f739287..f02d03df89d6 100644
--- a/drivers/media/platform/atmel/Makefile
+++ b/drivers/media/platform/atmel/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
atmel-isc-objs = atmel-sama5d2-isc.o
atmel-xisc-objs = atmel-sama7g5-isc.o
-atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o
+atmel-isc-common-objs = atmel-isc-base.o atmel-isc-clk.o atmel-isc-scaler.o

obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-common.o
diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index 67b4a2323fed..448bf281c61a 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -1712,6 +1712,7 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,
struct isc_device, v4l2_dev);
struct isc_subdev_entity *subdev_entity =
container_of(notifier, struct isc_subdev_entity, notifier);
+ int pad;

if (video_is_registered(&isc->video_dev)) {
v4l2_err(&isc->v4l2_dev, "only supports one sub-device.\n");
@@ -1720,6 +1721,16 @@ static int isc_async_bound(struct v4l2_async_notifier *notifier,

subdev_entity->sd = subdev;

+ pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode,
+ MEDIA_PAD_FL_SOURCE);
+ if (pad < 0) {
+ v4l2_err(&isc->v4l2_dev, "failed to find pad for %s\n",
+ subdev->name);
+ return pad;
+ }
+
+ isc->remote_pad = pad;
+
return 0;
}

@@ -1734,8 +1745,8 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
v4l2_ctrl_handler_free(&isc->ctrls.handler);
}

-static struct isc_format *find_format_by_code(struct isc_device *isc,
- unsigned int code, int *index)
+struct isc_format *isc_find_format_by_code(struct isc_device *isc,
+ unsigned int code, int *index)
{
struct isc_format *fmt = &isc->formats_list[0];
unsigned int i;
@@ -1751,6 +1762,7 @@ static struct isc_format *find_format_by_code(struct isc_device *isc,

return NULL;
}
+EXPORT_SYMBOL_GPL(isc_find_format_by_code);

static int isc_formats_init(struct isc_device *isc)
{
@@ -1767,7 +1779,7 @@ static int isc_formats_init(struct isc_device *isc)
NULL, &mbus_code)) {
mbus_code.index++;

- fmt = find_format_by_code(isc, mbus_code.code, &i);
+ fmt = isc_find_format_by_code(isc, mbus_code.code, &i);
if (!fmt) {
v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n",
mbus_code.code);
@@ -1893,7 +1905,8 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
vdev->queue = q;
vdev->lock = &isc->lock;
vdev->ctrl_handler = &isc->ctrls.handler;
- vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
+ vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_IO_MC;
video_set_drvdata(vdev, isc);

ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
@@ -1903,8 +1916,19 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
goto isc_async_complete_err;
}

+ ret = isc_scaler_link(isc);
+ if (ret < 0)
+ goto isc_async_complete_unregister_device;
+
+ ret = media_device_register(&isc->mdev);
+ if (ret < 0)
+ goto isc_async_complete_unregister_device;
+
return 0;

+isc_async_complete_unregister_device:
+ video_unregister_device(vdev);
+
isc_async_complete_err:
mutex_destroy(&isc->lock);
return ret;
@@ -1971,6 +1995,49 @@ int isc_pipeline_init(struct isc_device *isc)
}
EXPORT_SYMBOL_GPL(isc_pipeline_init);

+int isc_mc_init(struct isc_device *isc, u32 ver)
+{
+ const struct of_device_id *match;
+ int ret;
+
+ isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L;
+ isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT;
+ isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+
+ ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM,
+ isc->pads);
+ if (ret < 0) {
+ dev_err(isc->dev, "media entity init failed\n");
+ return ret;
+ }
+
+ isc->mdev.dev = isc->dev;
+
+ match = of_match_node(isc->dev->driver->of_match_table,
+ isc->dev->of_node);
+
+ strscpy(isc->mdev.driver_name, KBUILD_MODNAME,
+ sizeof(isc->mdev.driver_name));
+ strscpy(isc->mdev.model, match->compatible, sizeof(isc->mdev.model));
+ snprintf(isc->mdev.bus_info, sizeof(isc->mdev.bus_info), "platform:%s",
+ isc->v4l2_dev.name);
+ isc->mdev.hw_revision = ver;
+
+ media_device_init(&isc->mdev);
+
+ isc->v4l2_dev.mdev = &isc->mdev;
+
+ return isc_scaler_init(isc);
+}
+EXPORT_SYMBOL_GPL(isc_mc_init);
+
+void isc_mc_cleanup(struct isc_device *isc)
+{
+ media_entity_cleanup(&isc->video_dev.entity);
+ media_device_cleanup(&isc->mdev);
+}
+EXPORT_SYMBOL_GPL(isc_mc_cleanup);
+
/* regmap configuration */
#define ATMEL_ISC_REG_MAX 0xd5c
const struct regmap_config isc_regmap_config = {
diff --git a/drivers/media/platform/atmel/atmel-isc-scaler.c b/drivers/media/platform/atmel/atmel-isc-scaler.c
new file mode 100644
index 000000000000..d3dd131fdae0
--- /dev/null
+++ b/drivers/media/platform/atmel/atmel-isc-scaler.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Microchip Image Sensor Controller (ISC) Scaler entity support
+ *
+ * Copyright (C) 2022 Microchip Technology, Inc.
+ *
+ * Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *
+ */
+
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+
+#include "atmel-isc-regs.h"
+#include "atmel-isc.h"
+
+static void isc_scaler_prepare_fmt(struct v4l2_mbus_framefmt *framefmt)
+{
+ framefmt->colorspace = V4L2_COLORSPACE_SRGB;
+ framefmt->field = V4L2_FIELD_NONE;
+ framefmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+ framefmt->quantization = V4L2_QUANTIZATION_DEFAULT;
+ framefmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+};
+
+static int isc_scaler_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *format)
+{
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+ struct v4l2_mbus_framefmt *v4l2_try_fmt;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+ v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
+ format->pad);
+ format->format = *v4l2_try_fmt;
+
+ return 0;
+ }
+
+ format->format = isc->scaler_format[format->pad];
+
+ return 0;
+}
+
+static int isc_scaler_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_format *req_fmt)
+{
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+ struct v4l2_mbus_framefmt *v4l2_try_fmt;
+ struct isc_format *fmt;
+ unsigned int i;
+
+ /* Source format is fixed, we cannot change it */
+ if (req_fmt->pad == ISC_SCALER_PAD_SOURCE) {
+ req_fmt->format = isc->scaler_format[ISC_SCALER_PAD_SOURCE];
+ return 0;
+ }
+
+ /* There is no limit on the frame size on the sink pad */
+ v4l_bound_align_image(&req_fmt->format.width, 16, UINT_MAX, 0,
+ &req_fmt->format.height, 16, UINT_MAX, 0, 0);
+
+ isc_scaler_prepare_fmt(&req_fmt->format);
+
+ fmt = isc_find_format_by_code(isc, req_fmt->format.code, &i);
+
+ if (!fmt)
+ fmt = &isc->formats_list[0];
+
+ req_fmt->format.code = fmt->mbus_code;
+
+ if (req_fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
+ req_fmt->pad);
+ *v4l2_try_fmt = req_fmt->format;
+ /* Trying on the sink pad makes the source pad change too */
+ v4l2_try_fmt = v4l2_subdev_get_try_format(sd, sd_state,
+ ISC_SCALER_PAD_SOURCE);
+ *v4l2_try_fmt = req_fmt->format;
+
+ v4l_bound_align_image(&v4l2_try_fmt->width,
+ 16, isc->max_width, 0,
+ &v4l2_try_fmt->height,
+ 16, isc->max_height, 0, 0);
+ /* if we are just trying, we are done */
+ return 0;
+ }
+
+ isc->scaler_format[ISC_SCALER_PAD_SINK] = req_fmt->format;
+
+ /* The source pad is the same as the sink, but we have to crop it */
+ isc->scaler_format[ISC_SCALER_PAD_SOURCE] =
+ isc->scaler_format[ISC_SCALER_PAD_SINK];
+ v4l_bound_align_image
+ (&isc->scaler_format[ISC_SCALER_PAD_SOURCE].width, 16,
+ isc->max_width, 0,
+ &isc->scaler_format[ISC_SCALER_PAD_SOURCE].height, 16,
+ isc->max_height, 0, 0);
+
+ return 0;
+}
+
+static int isc_scaler_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+
+ /*
+ * All formats supported by the ISC are supported by the scaler.
+ * Advertise the formats which the ISC can take as input, as the scaler
+ * entity cropping is part of the PFE module (parallel front end)
+ */
+ if (code->index < isc->formats_list_size) {
+ code->code = isc->formats_list[code->index].mbus_code;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int isc_scaler_g_sel(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state,
+ struct v4l2_subdev_selection *sel)
+{
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+
+ if (sel->pad == ISC_SCALER_PAD_SOURCE)
+ return -EINVAL;
+
+ if (sel->target == V4L2_SEL_TGT_CROP_BOUNDS) {
+ /* bounds are the maximum rectangle which ISC can take */
+ sel->r.height = isc->max_height;
+ sel->r.width = isc->max_width;
+ sel->r.left = 0;
+ sel->r.top = 0;
+ } else if (sel->target == V4L2_SEL_TGT_CROP) {
+ /*
+ * crop is done to the output format,
+ * limited by ISC maximum size
+ */
+ sel->r.height = isc->scaler_format[ISC_SCALER_PAD_SOURCE].height;
+ sel->r.width = isc->scaler_format[ISC_SCALER_PAD_SOURCE].width;
+ sel->r.left = 0;
+ sel->r.top = 0;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int isc_scaler_init_cfg(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *sd_state)
+{
+ struct v4l2_mbus_framefmt *v4l2_try_fmt =
+ v4l2_subdev_get_try_format(sd, sd_state, 0);
+ struct v4l2_rect *try_crop;
+ struct isc_device *isc = container_of(sd, struct isc_device, scaler_sd);
+
+ *v4l2_try_fmt = isc->scaler_format[ISC_SCALER_PAD_SOURCE];
+
+ try_crop = v4l2_subdev_get_try_crop(sd, sd_state, 0);
+
+ try_crop->top = 0;
+ try_crop->left = 0;
+ try_crop->width = v4l2_try_fmt->width;
+ try_crop->height = v4l2_try_fmt->height;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = {
+ .enum_mbus_code = isc_scaler_enum_mbus_code,
+ .set_fmt = isc_scaler_set_fmt,
+ .get_fmt = isc_scaler_get_fmt,
+ .get_selection = isc_scaler_g_sel,
+ .init_cfg = isc_scaler_init_cfg,
+};
+
+static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = {
+ .pad = &isc_scaler_pad_ops,
+};
+
+int isc_scaler_init(struct isc_device *isc)
+{
+ int ret;
+
+ v4l2_subdev_init(&isc->scaler_sd, &xisc_scaler_subdev_ops);
+
+ isc->scaler_sd.owner = THIS_MODULE;
+ isc->scaler_sd.dev = isc->dev;
+ snprintf(isc->scaler_sd.name, sizeof(isc->scaler_sd.name),
+ "atmel_isc_scaler");
+
+ isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
+ isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+
+ isc_scaler_prepare_fmt(&isc->scaler_format[ISC_SCALER_PAD_SOURCE]);
+ isc->scaler_format[ISC_SCALER_PAD_SOURCE].height = isc->max_height;
+ isc->scaler_format[ISC_SCALER_PAD_SOURCE].width = isc->max_width;
+ isc->scaler_format[ISC_SCALER_PAD_SOURCE].code =
+ isc->formats_list[0].mbus_code;
+
+ isc->scaler_format[ISC_SCALER_PAD_SINK] =
+ isc->scaler_format[ISC_SCALER_PAD_SOURCE];
+
+ ret = media_entity_pads_init(&isc->scaler_sd.entity,
+ ISC_SCALER_PADS_NUM,
+ isc->scaler_pads);
+ if (ret < 0) {
+ dev_err(isc->dev, "scaler sd media entity init failed\n");
+ return ret;
+ }
+
+ ret = v4l2_device_register_subdev(&isc->v4l2_dev, &isc->scaler_sd);
+ if (ret < 0) {
+ dev_err(isc->dev, "scaler sd failed to register subdev\n");
+ return ret;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(isc_scaler_init);
+
+int isc_scaler_link(struct isc_device *isc)
+{
+ int ret;
+
+ ret = media_create_pad_link(&isc->current_subdev->sd->entity,
+ isc->remote_pad, &isc->scaler_sd.entity,
+ ISC_SCALER_PAD_SINK,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+
+ if (ret < 0) {
+ dev_err(isc->dev, "Failed to create pad link: %s to %s\n",
+ isc->current_subdev->sd->entity.name,
+ isc->scaler_sd.entity.name);
+ return ret;
+ }
+
+ dev_dbg(isc->dev, "link with %s pad: %d\n",
+ isc->current_subdev->sd->name, isc->remote_pad);
+
+ ret = media_create_pad_link(&isc->scaler_sd.entity,
+ ISC_SCALER_PAD_SOURCE,
+ &isc->video_dev.entity, ISC_PAD_SINK,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+
+ if (ret < 0) {
+ dev_err(isc->dev, "Failed to create pad link: %s to %s\n",
+ isc->scaler_sd.entity.name,
+ isc->video_dev.entity.name);
+ return ret;
+ }
+
+ dev_dbg(isc->dev, "link with %s pad: %d\n", isc->scaler_sd.name,
+ ISC_SCALER_PAD_SOURCE);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(isc_scaler_link);
+
diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
index f9ad7ec6bd13..9cc69c3ae26d 100644
--- a/drivers/media/platform/atmel/atmel-isc.h
+++ b/drivers/media/platform/atmel/atmel-isc.h
@@ -183,6 +183,17 @@ struct isc_reg_offsets {
u32 his_entry;
};

+enum isc_mc_pads {
+ ISC_PAD_SINK = 0,
+ ISC_PADS_NUM = 1,
+};
+
+enum isc_scaler_pads {
+ ISC_SCALER_PAD_SINK = 0,
+ ISC_SCALER_PAD_SOURCE = 1,
+ ISC_SCALER_PADS_NUM = 2,
+};
+
/*
* struct isc_device - ISC device driver data/config struct
* @regmap: Register map
@@ -258,6 +269,12 @@ struct isc_reg_offsets {
* be used as an input to the controller
* @controller_formats_size: size of controller_formats array
* @formats_list_size: size of formats_list array
+ * @pads: media controller pads for isc video entity
+ * @mdev: media device that is registered by the isc
+ * @remote_pad: remote pad on the connected subdevice
+ * @scaler_sd: subdevice for the scaler that isc registers
+ * @scaler_pads: media controller pads for the scaler subdevice
+ * @scaler_format: current format for the scaler subdevice
*/
struct isc_device {
struct regmap *regmap;
@@ -346,6 +363,19 @@ struct isc_device {
struct isc_format *formats_list;
u32 controller_formats_size;
u32 formats_list_size;
+
+ struct {
+ struct media_pad pads[ISC_PADS_NUM];
+ struct media_device mdev;
+
+ u32 remote_pad;
+ };
+
+ struct {
+ struct v4l2_subdev scaler_sd;
+ struct media_pad scaler_pads[ISC_SCALER_PADS_NUM];
+ struct v4l2_mbus_framefmt scaler_format[ISC_SCALER_PADS_NUM];
+ };
};

extern const struct regmap_config isc_regmap_config;
@@ -357,4 +387,11 @@ int isc_clk_init(struct isc_device *isc);
void isc_subdev_cleanup(struct isc_device *isc);
void isc_clk_cleanup(struct isc_device *isc);

+int isc_scaler_link(struct isc_device *isc);
+int isc_scaler_init(struct isc_device *isc);
+int isc_mc_init(struct isc_device *isc, u32 ver);
+void isc_mc_cleanup(struct isc_device *isc);
+
+struct isc_format *isc_find_format_by_code(struct isc_device *isc,
+ unsigned int code, int *index);
#endif
diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
index c5b9563e36cb..c244682ea22f 100644
--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
@@ -553,6 +553,12 @@ static int atmel_isc_probe(struct platform_device *pdev)
break;
}

+ regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
+
+ ret = isc_mc_init(isc, ver);
+ if (ret < 0)
+ goto isc_probe_mc_init_err;
+
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_request_idle(dev);
@@ -562,7 +568,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
ret = clk_prepare_enable(isc->ispck);
if (ret) {
dev_err(dev, "failed to enable ispck: %d\n", ret);
- goto cleanup_subdev;
+ goto isc_probe_mc_init_err;
}

/* ispck should be greater or equal to hclock */
@@ -572,7 +578,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
goto unprepare_clk;
}

- regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
dev_info(dev, "Microchip ISC version %x\n", ver);

return 0;
@@ -580,6 +585,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
unprepare_clk:
clk_disable_unprepare(isc->ispck);

+isc_probe_mc_init_err:
+ isc_mc_cleanup(isc);
+
cleanup_subdev:
isc_subdev_cleanup(isc);

@@ -600,6 +608,8 @@ static int atmel_isc_remove(struct platform_device *pdev)

pm_runtime_disable(&pdev->dev);

+ isc_mc_cleanup(isc);
+
isc_subdev_cleanup(isc);

v4l2_device_unregister(&isc->v4l2_dev);
diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
index 07a80b08bc54..9dc75eed0098 100644
--- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c
+++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
@@ -547,15 +547,23 @@ static int microchip_xisc_probe(struct platform_device *pdev)
break;
}

+ regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
+
+ ret = isc_mc_init(isc, ver);
+ if (ret < 0)
+ goto isc_probe_mc_init_err;
+
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_request_idle(dev);

- regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
dev_info(dev, "Microchip XISC version %x\n", ver);

return 0;

+isc_probe_mc_init_err:
+ isc_mc_cleanup(isc);
+
cleanup_subdev:
isc_subdev_cleanup(isc);

@@ -576,6 +584,8 @@ static int microchip_xisc_remove(struct platform_device *pdev)

pm_runtime_disable(&pdev->dev);

+ isc_mc_cleanup(isc);
+
isc_subdev_cleanup(isc);

v4l2_device_unregister(&isc->v4l2_dev);
--
2.25.1
\
 
 \ /
  Last update: 2022-03-07 13:06    [W:0.132 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site