lkml.org 
[lkml]   [2022]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RESEND][PATCH v2 3/4] x86/PCI: Also match function number in $PIR table
Contrary to the PCI BIOS specification[1] some systems include the PCI 
function number for onboard devices in their $PIR table. Consequently
the wrong entry can be matched leading to interrupt routing failures.

For example the Tyan Tomcat IV S1564D board has:

00:07.1 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:00/deb8

00:07.2 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:63/deb8

for its IDE interface and USB controller functions of the 82371SB PIIX3
southbridge. Consequently the first entry matches causing the inability
to route the USB interrupt in the `noapic' mode, in which case we need
to rely on the interrupt line set by the BIOS:

uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch
uhci_hcd 0000:00:07.2: PCI INT D not routed
uhci_hcd 0000:00:07.2: enabling bus mastering
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000

Try to match the PCI device and function combined then and if that fails
move on to PCI device matching only. Compliant systems will only have a
single $PIR table entry per PCI device, so this update does not change
the semantics with them, while systems that have several entries for
individual functions of a single PCI device each will match the correct
entry:

uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch
uhci_hcd 0000:00:07.2: PCI INT D -> PIRQ 63, mask deb8, excl 0c20
uhci_hcd 0000:00:07.2: PCI INT D -> newirq 11
uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:00:11.0
uhci_hcd 0000:00:07.2: enabling bus mastering
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000

[1] "PCI BIOS Specification", Revision 2.1, PCI Special Interest Group,
August 26, 1994, Table 4-1 "Layout of IRQ routing table entry.", p.
12

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
---
No change from v1.
---
arch/x86/pci/irq.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)

linux-x86-pirq-fn.diff
Index: linux-macro/arch/x86/pci/irq.c
===================================================================
--- linux-macro.orig/arch/x86/pci/irq.c
+++ linux-macro/arch/x86/pci/irq.c
@@ -1132,18 +1132,29 @@ static void __init pirq_find_router(stru
/* The device remains referenced for the kernel lifetime */
}

+/*
+ * We're supposed to match on the PCI device only and not the function,
+ * but some BIOSes build their tables with the PCI function included
+ * for motherboard devices, so if a complete match is found, then give
+ * it precedence over a slot match.
+ */
static struct irq_info *pirq_get_info(struct pci_dev *dev)
{
struct irq_routing_table *rt = pirq_table;
int entries = (rt->size - sizeof(struct irq_routing_table)) /
sizeof(struct irq_info);
+ struct irq_info *slotinfo = NULL;
struct irq_info *info;

for (info = rt->slots; entries--; info++)
- if (info->bus == dev->bus->number &&
- PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
- return info;
- return NULL;
+ if (info->bus == dev->bus->number) {
+ if (info->devfn == dev->devfn)
+ return info;
+ if (!slotinfo &&
+ PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+ slotinfo = info;
+ }
+ return slotinfo;
}

static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
\
 
 \ /
  Last update: 2022-03-31 09:11    [W:0.066 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site