lkml.org 
[lkml]   [2022]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9 17/22] phy: phy-mtk-dp: Add driver for DP phy
From
Il 28/03/22 00:39, Guillaume Ranquet ha scritto:
> From: Markus Schneider-Pargmann <msp@baylibre.com>
>
> This is a new driver that supports the integrated DisplayPort phy for
> mediatek SoCs, especially the mt8195. The phy is integrated into the
> DisplayPort controller and will be created by the mtk-dp driver. This
> driver expects a struct regmap to be able to work on the same registers
> as the DisplayPort controller. It sets the device data to be the struct
> phy so that the DisplayPort controller can easily work with it.
>
> The driver does not have any devicetree bindings because the datasheet
> does not list the controller and the phy as distinct units.
>
> The interaction with the controller can be covered by the configure
> callback of the phy framework and its displayport parameters.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> ---
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 ++
> drivers/phy/mediatek/Makefile | 1 +
> drivers/phy/mediatek/phy-mtk-dp.c | 201 ++++++++++++++++++++++++++++++
> 4 files changed, 211 insertions(+)
> create mode 100644 drivers/phy/mediatek/phy-mtk-dp.c
>

..snip..

> diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c
> new file mode 100644
> index 000000000000..e5c5494f3636
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-dp.c

..snip..

> +
> +static int mtk_dp_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mtk_dp_phy *dp_phy;
> + struct phy *phy;
> + struct regmap *regs;
> +
> + regs = syscon_regmap_lookup_by_phandle(dev->of_node, "mediatek,dp-syscon");
> +

Please drop this blank line

> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + dp_phy = devm_kzalloc(dev, sizeof(*dp_phy), GFP_KERNEL);
> + if (!dp_phy)
> + return -ENOMEM;
> +
> + dp_phy->regs = regs;
> +
> + phy = devm_phy_create(dev, NULL, &mtk_dp_phy_dev_ops);
> +

Same here

> + if (IS_ERR(phy))
> + return dev_err_probe(dev, PTR_ERR(phy), "Failed to create DP PHY: %ld\n", PTR_ERR(phy));
> +

Using dev_err_probe automates printing the error, so the correct usage is:

return dev_err_probe(dev, PTR_ERR(phy), "Failed to create DP PHY\n");

> + phy_set_drvdata(phy, dp_phy);
> +
> + return 0;
> +}
> +
> +struct platform_driver mtk_dp_phy_driver = {
> + .probe = mtk_dp_phy_probe,
> + .driver = {
> + .name = "mediatek-dp-phy",
> + },
> +};
> +module_platform_driver(mtk_dp_phy_driver);

Also, in your dt-binding, you mention a compatible for this driver, but I don't see
any, here. This means that you do know what to do, so please do it.

Regards,
Angelo

> +
> +MODULE_AUTHOR("Markus Schneider-Pargmann <msp@baylibre.com>");
> +MODULE_DESCRIPTION("MediaTek DP PHY Driver");
> +MODULE_LICENSE("GPL");

\
 
 \ /
  Last update: 2022-03-28 10:21    [W:0.271 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site