lkml.org 
[lkml]   [2022]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 5/6] arm64: dts: qcom: sm6350: Add UFS nodes
From
On 18/03/2022 19:30, Luca Weiss wrote:
> Add the necessary nodes for UFS and its PHY.
>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
> arch/arm64/boot/dts/qcom/sm6350.dtsi | 79 ++++++++++++++++++++++++++++
> 1 file changed, 79 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index d7c9edff19f7..c5c93b6bcd2a 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -541,6 +541,85 @@ uart2: serial@98c000 {
> };
> };
>
> + ufs_mem_hc: ufshc@1d84000 {

Generic node name, so ufs.

> + compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
> + "jedec,ufs-2.0";
> + reg = <0 0x01d84000 0 0x3000>,
> + <0 0x01d90000 0 0x8000>;
> + reg-names = "std", "ice";
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&ufs_mem_phy_lanes>;
> + phy-names = "ufsphy";
> + lanes-per-direction = <2>;
> + #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
> +
> + power-domains = <&gcc UFS_PHY_GDSC>;
> +
> + iommus = <&apps_smmu 0x80 0x0>;
> +
> + clock-names =

Drop unneeded blank line, start just after '=' and align next elements
with it.

> + "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "core_clk_ice",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + clocks =

The same.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-03-19 15:43    [W:0.150 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site