lkml.org 
[lkml]   [2022]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] mfd: arizona-spi: Add Android board ACPI table handling
On Wed, Feb 23, 2022 at 02:42:22PM +0100, Hans de Goede wrote:
> x86/ACPI boards with an arizona WM5102 codec ship with either Windows or
> Android as factory installed OS.
>
> The ACPI fwnode for the codec on Android boards misses 2 things compared
> to the Windows boards (this is hardcoded in the Android board kernels):
>
> 1. There is no CLKE ACPI method to enabe the 32 KHz clock the codec needs
> for jack-detection.
>
> 2. The GPIOs used by the codec are not listed in the fwnode for the codec.
>
> The ACPI tables on x86/ACPI boards shipped with Android being incomplete
> happens a lot. The special drivers/platform/x86/x86-android-tablets.c
> module contains DMI based per model handling to compensate for this.
>
> This module will enable the 32KHz clock through the pinctrl framework
> to fix 1. and it will also register a gpio-lookup table for all GPIOs
> needed by the codec + machine driver, including the GPIOs coming from
> the codec itself.
>
> Add an arizona_spi_acpi_android_probe() function which waits for the
> x86-android-tablets to have set things up before continue with probing
> the arizona WM5102 codec.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---

Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>

Thanks,
Charles

\
 
 \ /
  Last update: 2022-02-28 12:36    [W:0.084 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site