[lkml]   [2022]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 11/49] qed: replace bitmap_weight with bitmap_empty in qed_roce_stop()
qed_roce_stop() calls bitmap_weight() to check if any bit of a given
bitmap is set. We can do it more efficiently with bitmap_empty() because
bitmap_empty() stops traversing the bitmap as soon as it finds first set
bit, while bitmap_weight() counts all bits unconditionally.

Signed-off-by: Yury Norov <>
drivers/net/ethernet/qlogic/qed/qed_roce.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index 071b4aeaddf2..134ecfca96a3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -76,7 +76,7 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn)
* We delay for a short while if an async destroy QP is still expected.
* Beyond the added delay we clear the bitmap anyway.
- while (bitmap_weight(rcid_map->bitmap, rcid_map->max_count)) {
+ while (!bitmap_empty(rcid_map->bitmap, rcid_map->max_count)) {
/* If the HW device is during recovery, all resources are
* immediately reset without receiving a per-cid indication
* from HW. In this case we don't expect the cid bitmap to be
 \ /
  Last update: 2022-02-11 00:17    [W:0.287 / U:2.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site