lkml.org 
[lkml]   [2022]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5.4 260/320] PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
On Mon, Jan 24, 2022 at 07:44:04PM +0100, Greg Kroah-Hartman wrote:
> From: Lukas Wunner <lukas@wunner.de>
>
> commit 23584c1ed3e15a6f4bfab8dc5a88d94ab929ee12 upstream.

I would hold off on backporting the pciehp changes until we resolve
this regression in v5.17-rc1:

https://bugzilla.kernel.org/show_bug.cgi?id=215525

> The Power Fault Detected bit in the Slot Status register differs from
> all other hotplug events in that it is sticky: It can only be cleared
> after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8:
>
> If a power controller detects a main power fault on the hot-plug slot,
> it must automatically set its internal main power fault latch [...].
> The main power fault latch is cleared when software turns off power to
> the hot-plug slot.
>
> The stickiness used to cause interrupt storms and infinite loops which
> were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault
> interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable
> software notification on empty slots").
>
> Unfortunately in 2020 the infinite loop issue was inadvertently
> reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt
> race"): The hardirq handler pciehp_isr() clears the PFD bit until
> pciehp's power_fault_detected flag is set. That happens in the IRQ
> thread pciehp_ist(), which never learns of the event because the hardirq
> handler is stuck in an infinite loop. Fix by setting the
> power_fault_detected flag already in the hardirq handler.
>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989
> Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com
> Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race")
> Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de
> Reported-by: Joseph Bao <joseph.bao@intel.com>
> Tested-by: Joseph Bao <joseph.bao@intel.com>
> Signed-off-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> Cc: stable@vger.kernel.org # v4.19+
> Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> drivers/pci/hotplug/pciehp_hpc.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -577,6 +577,8 @@ read_status:
> */
> if (ctrl->power_fault_detected)
> status &= ~PCI_EXP_SLTSTA_PFD;
> + else if (status & PCI_EXP_SLTSTA_PFD)
> + ctrl->power_fault_detected = true;
>
> events |= status;
> if (!events) {
> @@ -586,7 +588,7 @@ read_status:
> }
>
> if (status) {
> - pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events);
> + pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, status);
>
> /*
> * In MSI mode, all event bits must be zero before the port
> @@ -660,8 +662,7 @@ static irqreturn_t pciehp_ist(int irq, v
> }
>
> /* Check Power Fault Detected */
> - if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
> - ctrl->power_fault_detected = 1;
> + if (events & PCI_EXP_SLTSTA_PFD) {
> ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
> pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
> PCI_EXP_SLTCTL_ATTN_IND_ON);
>
>

\
 
 \ /
  Last update: 2022-01-25 13:27    [W:1.074 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site