lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/9] regulator: rpi-panel: Ensure the backlight is off during probe.
Date
From: Dave Stevenson <dave.stevenson@raspberrypi.com>

The initial state of the Atmel is not defined, so ensure the
backlight PWM is set to 0 by default.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
drivers/regulator/rpi-panel-attiny-regulator.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/rpi-panel-attiny-regulator.c b/drivers/regulator/rpi-panel-attiny-regulator.c
index a4af7adad2b5..b3629a1e0e50 100644
--- a/drivers/regulator/rpi-panel-attiny-regulator.c
+++ b/drivers/regulator/rpi-panel-attiny-regulator.c
@@ -250,6 +250,7 @@ static int attiny_i2c_probe(struct i2c_client *i2c,

regmap_write(regmap, REG_POWERON, 0);
msleep(30);
+ regmap_write(regmap, REG_PWM, 0);

config.dev = &i2c->dev;
config.regmap = regmap;
--
2.34.1
\
 
 \ /
  Last update: 2022-01-25 04:39    [W:0.144 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site