lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.10 009/563] mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6
    Date
    From: Stefan Riedmueller <s.riedmueller@phytec.de>

    commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream.

    There is no need to explicitly set the default gpmi clock rate during
    boot for the i.MX 6 since this is done during nand_detect anyway.

    Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
    Cc: stable@vger.kernel.org
    Acked-by: Han Xu <han.xu@nxp.com>
    Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
    Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-1-ceggers@arri.de
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ---
    drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 ---------
    1 file changed, 9 deletions(-)

    --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
    +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
    @@ -1052,15 +1052,6 @@ static int gpmi_get_clks(struct gpmi_nan
    r->clock[i] = clk;
    }

    - if (GPMI_IS_MX6(this))
    - /*
    - * Set the default value for the gpmi clock.
    - *
    - * If you want to use the ONFI nand which is in the
    - * Synchronous Mode, you should change the clock as you need.
    - */
    - clk_set_rate(r->clock[0], 22000000);
    -
    return 0;

    err_clock:

    \
     
     \ /
      Last update: 2022-01-25 04:09    [W:4.017 / U:0.056 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site