lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/9] regulator: rpi-panel: Support official Raspberry Pi 7 inches touchscreen
Date
This patchset provides different fixes to the rpi-panel-attiny-regulator driver.

This is a preparation patchset for supporting the official Raspberry Pi 7
inches touchscreen.

It has been tested with a Raspberry Pi 4 B and the official Raspberry Pi 7
inches touchscreen.

Changes in v2:
* Add a dependency on OF_GPIO for GPIO controlled resets

Changes in v3:
* Add Signed-off-bys
* Use the regmap cache

Dave Stevenson (9):
regulator: rpi-panel: Register with a unique backlight name
regulator: rpi-panel: Handle I2C errors/timing to the Atmel
regulator: rpi-panel: Serialise operations.
regulator: rpi-panel: Ensure the backlight is off during probe.
regulator: rpi-panel: Convert to drive lines directly
regulator: rpi-panel: Add GPIO control for panel and touch resets
regulator: rpi-panel: Remove get_brightness hook
regulator/rpi-panel-attiny: Use the regmap cache
regulator/rpi-panel-attiny: Use two transactions for I2C read

drivers/regulator/Kconfig | 1 +
.../regulator/rpi-panel-attiny-regulator.c | 291 +++++++++++++++---
2 files changed, 248 insertions(+), 44 deletions(-)

--
2.34.1

\
 
 \ /
  Last update: 2022-01-25 01:11    [W:0.077 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site