lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1 3/6] iio: accel: sca3300: modified to support multi chips
Date
The drive support sca3300 only,there are some other similar chips,
for instance, SCL3300.
modified the driver to read the device id,
add the tables for the corresponding id to support multiple chips.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
drivers/iio/accel/sca3300.c | 108 +++++++++++++++++++++++++-----------
1 file changed, 75 insertions(+), 33 deletions(-)

diff --git a/drivers/iio/accel/sca3300.c b/drivers/iio/accel/sca3300.c
index e26b3175b3c6..26e6fab88a8f 100644
--- a/drivers/iio/accel/sca3300.c
+++ b/drivers/iio/accel/sca3300.c
@@ -37,11 +37,11 @@

/* Device ID */
#define SCA3300_REG_WHOAMI 0x10
-#define SCA3300_WHOAMI_ID 0x51

/* Device return status and mask */
#define SCA3300_VALUE_RS_ERROR 0x3
#define SCA3300_MASK_RS_STATUS GENMASK(1, 0)
+
enum sca3300_op_mode_indexes {
OP_MOD_1 = 0,
OP_MOD_2,
@@ -75,6 +75,11 @@ static const struct iio_chan_spec_ext_info sca3300_ext_info[] = {
{ }
};

+enum sca3300_chip_type {
+ CHIP_SCA3300 = 0,
+ CHIP_CNT
+};
+
enum sca3300_scan_indexes {
SCA3300_ACC_X = 0,
SCA3300_ACC_Y,
@@ -126,8 +131,13 @@ static const struct iio_chan_spec sca3300_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(4)
};

-static const int sca3300_lp_freq[] = {70, 70, 70, 10};
-static const int sca3300_accel_scale[][2] = {{0, 370}, {0, 741}, {0, 185}, {0, 185}};
+static const int sca3300_lp_freq[CHIP_CNT][OP_MOD_CNT] = {
+ [CHIP_SCA3300] = {70, 70, 70, 10},
+};
+
+static const int sca3300_accel_scale[CHIP_CNT][OP_MOD_CNT][2] = {
+ [CHIP_SCA3300] = {{0, 370}, {0, 741}, {0, 185}, {0, 185}},
+};

static const unsigned long sca3300_scan_masks[] = {
BIT(SCA3300_ACC_X) | BIT(SCA3300_ACC_Y) | BIT(SCA3300_ACC_Z) |
@@ -135,6 +145,15 @@ static const unsigned long sca3300_scan_masks[] = {
0
};

+struct sca3300_chip_info {
+ enum sca3300_chip_type chip_type;
+ const char *name;
+ u8 chip_id;
+ const struct iio_chan_spec *channels;
+ int num_channels;
+ unsigned long scan_masks;
+};
+
/**
* struct sca3300_data - device data
* @spi: SPI device structure
@@ -150,8 +169,21 @@ struct sca3300_data {
s16 channels[4];
s64 ts __aligned(sizeof(s64));
} scan;
+ const struct sca3300_chip_info *chip_info;
u8 txbuf[4] ____cacheline_aligned;
u8 rxbuf[4];
+
+};
+
+static const struct sca3300_chip_info sca3300_chip_info_tbl[] = {
+ [CHIP_SCA3300] = {
+ .chip_type = CHIP_SCA3300,
+ .name = "sca3300",
+ .chip_id = 0x51,
+ .channels = sca3300_channels,
+ .num_channels = ARRAY_SIZE(sca3300_channels),
+ .scan_masks = sca3300_scan_masks,
+ },
};

DECLARE_CRC8_TABLE(sca3300_crc_table);
@@ -271,23 +303,20 @@ static int sca3300_write_raw(struct iio_dev *indio_dev,

switch (mask) {
case IIO_CHAN_INFO_SCALE:
- if (val)
- return -EINVAL;
-
- for (i = 0; i < ARRAY_SIZE(sca3300_accel_scale); i++) {
- if (val2 == sca3300_accel_scale[i][1])
+ for (i = 0; i < OP_MOD_CNT; i++) {
+ if ((val == sca3300_accel_scale[data->chip_info->chip_type][0]) &&
+ (val2 == sca3300_accel_scale[data->chip_info->chip_type][1]))
return sca3300_write_reg(data, SCA3300_REG_MODE, i);
}
return -EINVAL;
-
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
ret = sca3300_read_reg(data, SCA3300_REG_MODE, &reg_val);
if (ret)
return ret;
/* freq. change is possible only for mode 3 and 4 */
- if (reg_val == 2 && val == sca3300_lp_freq[3])
+ if (reg_val == 2 && val == sca3300_lp_freq[data->chip_info->chip_type][3])
return sca3300_write_reg(data, SCA3300_REG_MODE, 3);
- if (reg_val == 3 && val == sca3300_lp_freq[2])
+ if (reg_val == 3 && val == sca3300_lp_freq[data->chip_info->chip_type][2])
return sca3300_write_reg(data, SCA3300_REG_MODE, 2);
return -EINVAL;
default:
@@ -313,14 +342,18 @@ static int sca3300_read_raw(struct iio_dev *indio_dev,
ret = sca3300_read_reg(data, SCA3300_REG_MODE, &reg_val);
if (ret)
return ret;
- *val = 0;
- *val2 = sca3300_accel_scale[reg_val][1];
+ if (chan->type == IIO_ACCEL) {
+ *val = sca3300_accel_scale[data->chip_info->chip_type][reg_val][0];
+ *val2 = sca3300_accel_scale[data->chip_info->chip_type][reg_val][1];
+ } else {
+ return -EINVAL;
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
ret = sca3300_read_reg(data, SCA3300_REG_MODE, &reg_val);
if (ret)
return ret;
- *val = sca3300_lp_freq[reg_val];
+ *val = sca3300_lp_freq[data->chip_info->chip_type][reg_val];
return IIO_VAL_INT;
default:
return -EINVAL;
@@ -364,6 +397,7 @@ static int sca3300_init(struct sca3300_data *sca_data,
{
int value = 0;
int ret;
+ int i = 0;

ret = sca3300_write_reg(sca_data, SCA3300_REG_MODE,
SCA3300_MODE_SW_RESET);
@@ -375,15 +409,22 @@ static int sca3300_init(struct sca3300_data *sca_data,
* Wait 15ms for settling of signal paths.
*/
usleep_range(16e3, 50e3);
-
- ret = sca3300_read_reg(sca_data, SCA3300_REG_WHOAMI, &value);
- if (ret)
- return ret;
-
- if (value != SCA3300_WHOAMI_ID) {
- dev_err(&sca_data->spi->dev,
- "device id not expected value, %d != %u\n",
- value, SCA3300_WHOAMI_ID);
+ for (i = 0; i < ARRAY_SIZE(sca3300_chip_info_tbl); i++) {
+ ret = sca3300_read_reg(sca_data, SCA3300_REG_WHOAMI, &value);
+ if (ret)
+ return ret;
+ if (sca3300_chip_info_tbl[i].chip_id == value) {
+ sca_data->chip_info = &sca3300_chip_info_tbl[i];
+ indio_dev->name = sca3300_chip_info_tbl[i].name;
+ indio_dev->channels = sca3300_chip_info_tbl[i].channels;
+ indio_dev->num_channels = sca3300_chip_info_tbl[i].num_channels;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->available_scan_masks = sca3300_chip_info_tbl[i].scan_masks;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(sca3300_chip_info_tbl)) {
+ dev_err(&sca_data->spi->dev, "Invalid chip %x\n", value);
return -ENODEV;
}
return 0;
@@ -417,15 +458,21 @@ static int sca3300_read_avail(struct iio_dev *indio_dev,
const int **vals, int *type, int *length,
long mask)
{
+ struct sca3300_data *data = iio_priv(indio_dev);
+
switch (mask) {
case IIO_CHAN_INFO_SCALE:
- *vals = (const int *)sca3300_accel_scale;
- *length = ARRAY_SIZE(sca3300_accel_scale) * 2 - 2;
+ if (chan->type == IIO_ACCEL) {
+ *vals = (const int *)sca3300_accel_scale[data->chip_info->chip_type];
+ *length = ARRAY_SIZE(sca3300_accel_scale[data->chip_info->chip_type]) * 2;
+ } else {
+ return -EINVAL;
+ }
*type = IIO_VAL_INT_PLUS_MICRO;
return IIO_AVAIL_LIST;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
- *vals = &sca3300_lp_freq[2];
- *length = 2;
+ *vals = (const int *)sca3300_lp_freq[data->chip_info->chip_type];
+ *length = ARRAY_SIZE(sca3300_lp_freq[data->chip_info->chip_type]);
*type = IIO_VAL_INT;
return IIO_AVAIL_LIST;
default:
@@ -471,7 +518,6 @@ static int sca3300_probe(struct spi_device *spi)
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*sca_data));
if (!indio_dev)
return -ENOMEM;
-
sca_data = iio_priv(indio_dev);
mutex_init(&sca_data->lock);
sca_data->spi = spi;
@@ -479,11 +525,7 @@ static int sca3300_probe(struct spi_device *spi)
crc8_populate_msb(sca3300_crc_table, SCA3300_CRC8_POLYNOMIAL);

indio_dev->info = &sca3300_info;
- indio_dev->name = SCA3300_ALIAS;
- indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->channels = sca3300_channels;
- indio_dev->num_channels = ARRAY_SIZE(sca3300_channels);
- indio_dev->available_scan_masks = sca3300_scan_masks;
+

ret = sca3300_init(sca_data, indio_dev);
if (ret) {
--
2.25.1
\
 
 \ /
  Last update: 2022-01-24 10:39    [W:0.159 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site