lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 021/186] media: flexcop-usb: fix control-message timeouts
Date
From: Johan Hovold <johan@kernel.org>

commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Note that the driver was multiplying some of the timeout values with HZ
twice resulting in 3000-second timeouts with HZ=1000.

Also note that two of the timeout defines are currently unused.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/usb/b2c2/flexcop-usb.c | 10 +++++-----
drivers/media/usb/b2c2/flexcop-usb.h | 12 ++++++------
2 files changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -86,7 +86,7 @@ static int flexcop_usb_readwrite_dw(stru
0,
fc_usb->data,
sizeof(u32),
- B2C2_WAIT_FOR_OPERATION_RDW * HZ);
+ B2C2_WAIT_FOR_OPERATION_RDW);

if (ret != sizeof(u32)) {
err("error while %s dword from %d (%d).", read ? "reading" :
@@ -154,7 +154,7 @@ static int flexcop_usb_v8_memory_req(str
wIndex,
fc_usb->data,
buflen,
- nWaitTime * HZ);
+ nWaitTime);
if (ret != buflen)
ret = -EIO;

@@ -248,13 +248,13 @@ static int flexcop_usb_i2c_req(struct fl
/* DKT 020208 - add this to support special case of DiSEqC */
case USB_FUNC_I2C_CHECKWRITE:
pipe = B2C2_USB_CTRL_PIPE_OUT;
- nWaitTime = 2;
+ nWaitTime = 2000;
request_type |= USB_DIR_OUT;
break;
case USB_FUNC_I2C_READ:
case USB_FUNC_I2C_REPEATREAD:
pipe = B2C2_USB_CTRL_PIPE_IN;
- nWaitTime = 2;
+ nWaitTime = 2000;
request_type |= USB_DIR_IN;
break;
default:
@@ -281,7 +281,7 @@ static int flexcop_usb_i2c_req(struct fl
wIndex,
fc_usb->data,
buflen,
- nWaitTime * HZ);
+ nWaitTime);

if (ret != buflen)
ret = -EIO;
--- a/drivers/media/usb/b2c2/flexcop-usb.h
+++ b/drivers/media/usb/b2c2/flexcop-usb.h
@@ -91,13 +91,13 @@ typedef enum {
UTILITY_SRAM_TESTVERIFY = 0x16,
} flexcop_usb_utility_function_t;

-#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
-#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
+#define B2C2_WAIT_FOR_OPERATION_RW 1000
+#define B2C2_WAIT_FOR_OPERATION_RDW 3000
+#define B2C2_WAIT_FOR_OPERATION_WDW 1000

-#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
-#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
+#define B2C2_WAIT_FOR_OPERATION_V8READ 3000
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3000
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3000

typedef enum {
V8_MEMORY_PAGE_DVB_CI = 0x20,

\
 
 \ /
  Last update: 2022-01-24 20:22    [W:0.944 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site