lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 027/186] media: redrat3: fix control-message timeouts
Date
From: Johan Hovold <johan@kernel.org>

commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/rc/redrat3.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -415,7 +415,7 @@ static int redrat3_send_cmd(int cmd, str
udev = rr3->udev;
res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0000, 0x0000, data, sizeof(u8), HZ * 10);
+ 0x0000, 0x0000, data, sizeof(u8), 10000);

if (res < 0) {
dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d",
@@ -491,7 +491,7 @@ static u32 redrat3_get_timeout(struct re
pipe = usb_rcvctrlpipe(rr3->udev, 0);
ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5);
+ RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000);
if (ret != len)
dev_warn(rr3->dev, "Failed to read timeout from hardware\n");
else {
@@ -521,7 +521,7 @@ static int redrat3_set_timeout(struct rc
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout),
- HZ * 25);
+ 25000);
dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n",
be32_to_cpu(*timeout), ret);

@@ -553,32 +553,32 @@ static void redrat3_reset(struct redrat3
*val = 0x01;
rc = usb_control_msg(udev, rxpipe, RR3_RESET,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25);
+ RR3_CPUCS_REG_ADDR, 0, val, len, 25000);
dev_dbg(dev, "reset returned 0x%02x\n", rc);

*val = length_fuzz;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25);
+ RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000);
dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);

*val = (65536 - (minimum_pause * 2000)) / 256;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25);
+ RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000);
dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc);

*val = periods_measure_carrier;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25);
+ RR3_IR_IO_PERIODS_MF, 0, val, len, 25000);
dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val,
rc);

*val = RR3_DRIVER_MAXLENS;
rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25);
+ RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000);
dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);

kfree(val);
@@ -596,7 +596,7 @@ static void redrat3_get_firmware_rev(str
rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0),
RR3_FW_VERSION,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5);
+ 0, 0, buffer, RR3_FW_VERSION_LEN, 5000);

if (rc >= 0)
dev_info(rr3->dev, "Firmware rev: %s", buffer);
@@ -836,14 +836,14 @@ static int redrat3_transmit_ir(struct rc

pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress);
ret = usb_bulk_msg(rr3->udev, pipe, irdata,
- sendbuf_len, &ret_len, 10 * HZ);
+ sendbuf_len, &ret_len, 10000);
dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);

/* now tell the hardware to transmit what we sent it */
pipe = usb_rcvctrlpipe(rr3->udev, 0);
ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0, 0, irdata, 2, HZ * 10);
+ 0, 0, irdata, 2, 10000);

if (ret < 0)
dev_err(dev, "Error: control msg send failed, rc %d\n", ret);

\
 
 \ /
  Last update: 2022-01-24 20:13    [W:0.435 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site