lkml.org 
[lkml]   [2022]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6] sun4i-emac.c: add dma support
Le Sat, Jan 01, 2022 at 03:09:01PM +0800, Conley Lee a écrit :
> On 12/31/21 at 11:43上午, Corentin Labbe wrote:
> > Date: Fri, 31 Dec 2021 11:43:53 +0100
> > From: Corentin Labbe <clabbe.montjoie@gmail.com>
> > To: conleylee@foxmail.com
> > Cc: davem@davemloft.net, kuba@kernel.org, mripard@kernel.org,
> > wens@csie.org, netdev@vger.kernel.org,
> > linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
> > Subject: Re: [PATCH v6] sun4i-emac.c: add dma support
> >
> > Le Wed, Dec 29, 2021 at 09:43:51AM +0800, conleylee@foxmail.com a écrit :
> > > From: Conley Lee <conleylee@foxmail.com>
> > >
> > > Thanks for your review. Here is the new version for this patch.
> > >
> > > This patch adds support for the emac rx dma present on sun4i. The emac
> > > is able to move packets from rx fifo to RAM by using dma.
> > >
> > > Change since v4.
> > > - rename sbk field to skb
> > > - rename alloc_emac_dma_req to emac_alloc_dma_req
> > > - using kzalloc(..., GPF_ATOMIC) in interrupt context to avoid
> > > sleeping
> > > - retry by using emac_inblk_32bit when emac_dma_inblk_32bit fails
> > > - fix some code style issues
> > >
> > > Change since v5.
> > > - fix some code style issue
> > >
> >
> > Hello
> >
> > I just tested this on a sun4i-a10-olinuxino-lime
> >
> > I got:
> > [ 2.922812] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): get io resource from device: 0x1c0b000, size = 4096
> > [ 2.934512] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): failed to request dma channel. dma is disabled
> > [ 2.945740] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): configure dma failed. disable dma.
> > [ 2.957887] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 19 MAC: 02:49:09:40:ab:3d
> >
> > On which board did you test it and how ?
> >
> > Regards
>
> Sorry. I sent the email with text/html format. This email is an clean version.
>
> In order to enable dma rx channel. `dmas` and `dma-names` properties
> should be added to emac section in dts:
>
> emac: ethernet@1c0b000 {
> ...
> dmas = <&dma SUN4I_DMA_DEDICATED 7>;
> dma-names = "rx";
> ...
> }

Helo

Yes I figured that out. But you should have done a patch serie adding this.
Your patch is now applied but it is a useless change without the dtb change.
You should also probably update the driver binding (Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml) since you add new members to DT node.

Furthermore, why did you add RX only and not TX dma also ?

Probably it is too late since patch is applied but it is:
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-on: sun4i-a10-olinuxino-lime

Regards

\
 
 \ /
  Last update: 2022-01-02 18:39    [W:0.364 / U:1.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site