lkml.org 
[lkml]   [2021]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] dt-bindings: iio: adc: ad7949: add adi,reference-source
Date
From: Liam Beguin <lvb@xiphos.com>

Add bindings documentation for the adi,reference-source property.
This property is required to properly configure the ADC sample request
based on which reference source should be used for the calculation.

Signed-off-by: Liam Beguin <lvb@xiphos.com>
---
.../bindings/iio/adc/adi,ad7949.yaml | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 9b56bd4d5510..eae3121cad01 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -35,6 +35,27 @@ properties:
"#io-channel-cells":
const: 1

+ adi,reference-select:
+ description: |
+ Select the reference voltage source to use when converting samples.
+ Acceptable values are:
+ - 0: Internal reference and temperature sensor enabled.
+ Vref=2.5V, buffered output
+ - 1: Internal reference and temperature sensor enabled.
+ Vref=4.096V, buffered output
+ - 2: Use external reference, temperature sensor enabled.
+ Internal buffer disabled
+ - 3: Use external reference, internal buffer and temperature sensor
+ enabled.
+ - 6: Use external reference, internal buffer and temperature sensor
+ disabled.
+ - 7: Use external reference, internal buffer enabled.
+ Internal reference and temperature sensor disabled.
+
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 6, 7]
+ default: 7
+
required:
- compatible
- reg
--
2.30.1.489.g328c10930387
\
 
 \ /
  Last update: 2021-07-09 18:00    [W:0.124 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site